C Filtrafine Micro-Flow Series Filter Cartridges High Flow Asymmetric Polyethersulfone Membrane Cartridges for Critical Applications • Patented Highly Asymmetric PES Membrane • 100% Pre-flushed and Integrity Tested • Retention Ratings from 0.04 to 1.2μm • Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility • High Purity Polypropylene Outer Cage Enhances Structural Strength of Filter Cartridges • Fast Rinse-Up to 18 Megohm-cm • Various Gaskets/O-rings Materials – Compatible with Many Fluids • Manufactured Under a Certified ISO 9001 Quality System • Manufactured in a Class 1,000 Clean Room Flow Direction Product Specifications Materials of Construction: • • • • • Filter Media: Hardware: Sealing: Support Material: Gaskets/O-rings: Dimensions (nominal): • • Outside Diameter: Lengths: Highly Asymmetric Polyethersulfone Membrane Polypropylene Thermal Bond Polypropylene Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton Performance Specifications • Retention Ratings: Operating Conditions: • Maximum Operating Pressure: Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials: Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations Sanitizing Agents: Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information Rinse-Up: Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput Sterilization: Multiple Autoclaving for 30 Minutes at 250°F (121°C) under No End Load Conditions. In-Line Steam Sterilization is Not Recommended. May be In-Line Sanitized with Hot Water at 180°F (82°C) for 1 Hour Liquid Flow Rates vs....