*mydirectindustry

Catalogs
Filtrafine
Filtrafine TKF Series Filter Housings

Filtrafine TKF Series Filter Housings

Product catalog summary

Filtrafine TKF Series Filter Housings Overview

Housing Specifications: The filter housings are constructed from either 304 or 316 stainless steel, providing excellent corrosion resistance. The head and shell are made from these materials, with swing eye bolts also in 304 stainless steel. Shell O-rings are standard in EPDM, with optional materials including Viton, Teflon Encapsulated Viton, and Silicone.

Connections: The housings feature inlet/outlet connections ranging from 1.5” to 4” NPT or ANSI Flange, with vent and drain connections at 1/4” NPT and 3/4” NPT respectively. Optional connections include JIS, DIN Flanged, PT, and BSP.

Performance Specifications: The maximum operating pressure is 150 psig (10.3 bar) at 200°F (93°C) in liquid service. The design accommodates single or double open-end cartridges, enhancing flexibility in filter cartridge selection. The swing eye bolt closure design adds durability, and the side inlet/outlet design facilitates easy piping.

Design Options: The housings can accept seven cartridges of varying lengths (10”, 20”, 30”, 40”), allowing for optimal system design. They are available in 3, 5, 9, 12, 18, 22, and 28 round designs. An optional electropolish finish is available for enhanced surface finish.

Dimensional Data: The document provides detailed dimensional data for various models, including overhead clearance required for cartridge removal, maximum cartridge diameter, weight, and liquid flow rate. The models are identified by specific codes indicating the number of 10” equivalents, material of construction, connection style, and other specifications.

Ordering Information: The ordering information section provides a breakdown of the model codes, detailing the cartridge type, connection style, material of construction, and other specifications necessary for selecting the appropriate filter housing.

Catalog excerpts

H Filtrafine TKF Series Filter Housings 150 psig, Flat or Dome Flange Head with Swing Eye Bolts Closure Style Multiple Cartridges Filter Housings 150 psig Maximum Operating Pressure Permits Use in a Wide Range of Applications Innovative Sealing System Accepts Single Open End or Double Open End Cartridges Allowing Maximum Flexibility In Filter Cartridge Selection Swing Eye Bolt Closure Design for Added Durability 304 or 316 Stainless Steel Materials of Construction for Maximum Corrosion Resistance Optional Electropolish Finish is Available Side Inlet/Side Outlet Design Allows For Easy Piping Housing Accepts Seven-10”, 20”, 30”, 40” Cartridges Allowing Optimum System Design Housing Specifications Materials of Construction: A Shell O-rings: Viton, Teflon Encapsulated Viton, Silicone Optional Connection: Performance Specifications • Maximum Operating Pressure: 150 psig (10.3 bar) @ 200°F (93°C) in Liquid Service

Open the catalog to page 1

Dimensional Data Model Liquid Flow Rate gpm (Ipm) Maximum Cartridge Diameter Inches (mm) Overhead Clearance Required for Cartridge Removal Inches (mm) Ordering Information 14 No. of 10" Equiv 2 F AInlet / Outlet Connection Connection Connection Style Specification Size 3Cartridge Type DOE 3 = SOE with 222 O-rings, Flat Closed End 8 = SOE with 222 O-rings , Fin End 7 = SOE with 226 O-rings, Fin End Electro Polished © 2010 Filtrafine, September 2011 Bulletin #H-011 All Right Reserved. Filtrafine has the right to change subject without any notice P-80

Open the catalog to page 2

All Filtrafine catalogs and technical brochures

Archived catalogs

Carbon-Clean
2 Pages
Micro-Flow
2 Pages
Extra Flow
2 Pages
Wound-Fine
2 Pages
Poly-ADCT
2 Pages