1. Catalogs
  2. Filtrafine
  3. Filtrafine DJ-P Series Filter Housings

Filtrafine DJ-P Series Filter Housings

Filtrafine DJ-P Series Filter Housings

Filtrafine DJ-P Series Filter Housings

Product catalog summary
Filtrafine DJ-P Series Filter Housings Overview

Housing Specifications:
The DJ-P Series filter housings are constructed from pure virgin polypropylene, ensuring no talc, fillers, plasticizers, or lubricants are present, making them suitable for high purity water applications. The mounting bracket is made of stainless steel, and the standard gaskets/O-rings are EPDM, with optional Viton and Buna-N available.

Performance Specifications:
The housings are designed to accept 10” or 20” cartridges and are compatible with 222 O-rings filter cartridges, making them ideal for submicronic applications. They are an economical alternative to fluoropolymer filter housings and are manufactured from FDA-listed materials for food and beverage contact.

Connections:
- Inlet/Outlet: DJP10: 3/4” (26.7mm) FNPT; DJP20: 3/4” (26.7mm), 1” (33.4mm) FNPT
- Vent/Gauge: 1/4” (13.7mm) NPT
- Drain: 1/4” (13.7mm) NPT

Operating Conditions:
The maximum operating pressure is 125 psig (8.6 bar) at 77°F (25°C).

Ordering Information:
Models are available for different cartridge lengths and connection sizes. The DJ10P-3/4 model supports a flow rate up to 10 gpm (37.9 lpm) with dimensions of 6.5” (165mm) in length and 13.9” (354mm) in height, weighing 2.1 lbs (0.97 kg). The DJ20P-1 model supports a flow rate up to 20 gpm (75.7 lpm) with dimensions of 6.5” (165mm) in length and 23.7” (603mm) in height, weighing 3.2 lbs (1.47 kg).
See more

Catalog excerpts

Filtrafine DJ-P Series Filter Housings-1

H Filtrafine DJ-P Series Filter Housings Virgin Polypropylene, Accepts Single Open End 222 O-rings Filter Cartridge • Pure Virgin Polypropylene-No Talc, Fillers, Colorants, Plasticizers or Lubricants-Suited for High Purity Water Applications Models Available to Accept 10” or 20” Cartridges Accepts 222 O-rings Filter Cartridge-Excellent for Submicronic Applications All Materials are FDA Listed for Food and Beverage Contact Economical Alternative to Fluropolymer Filter Housings Optional Mounting Bracket in Stainless Steel Material Housing Specifications Materials of Construction: • Pure Virgin Polypropylene – No Talc, Fillers, Plasticizers, Lubricants Mounting Bracket: Stainless Steel Viton, Buna-N Performance Specifications • Maximum Operating Pressure: 125 psig (8.6 bar) @77°F (25°C) FDA Listed Materials: Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

 Open the catalog to page 1
Filtrafine DJ-P Series Filter Housings-2

Dimensional Data Liquid Flow Rate gpm (lpm) * For liquids other than water, multiply the pressure drop by the specific gravity of the fluid. Ordering Information DJ Product Name 3/4 Inlet / Outlet Connection Size 3= Single Open End with 222 O-rings, Flat Closed End © 2010 Filtrafine, September 2010 Bulletin #H-001 All Right Reserved. Filtrafine has the right to change subject without any notice P-60

 Open the catalog to page 2

All Filtrafine catalogs and technical brochures

  1. CB-B Series

    2  Pages

  2. HPV

    4  Pages

  3. Mega Flow

    2  Pages

  4. Micro-Flow G

    2  Pages

  5. Pleated Flow

    2  Pages

  6. Puris-Fine BB

    2  Pages

  7. Wound-Fine BB

    2  Pages

  8. UPW-Flow

    2  Pages

  9. HIE

    2  Pages

  10. Pleated-Flow

    2  Pages

  11. Superior-Fine

    2  Pages

  12. Puris-Fine

    2  Pages

Archived catalogs

  1. Carbon-Clean

    2  Pages

  2. Micro-Flow

    2  Pages

  3. Extra Flow

    2  Pages

  4. Wound-Fine

    2  Pages

  5. Poly-ADCT

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.