Turbopulse Industrial Series
4Pages

TIRtAflEC INDUSTRIES Features ■ 15 sizes from 15 to 500mm (y2 to 20") ■ Wide variety of process connections - BSP / NPT male to 50mm (2") - ANSI or DIN flanges ■ Pressure to 250 bar (3675 psi) ■ Standard range of -50 to 120°C (-58 to 250°F) ■ Long life tungsten carbide bearings ■ +/- 0.5% linearity (10:1 turdown) Options ■ +/- 0.15% linearity (10:1 turndown) for sizes 100mm (4") and larger ■ Explosionproof or intrinsically safe pickoffs ■ Integral preamplifier, frequency to current convertor (4-20 mA output) or flowrate / totaliser with various outputs. ■ Integral or remote self powered flow rate-totaliser with scaled pulse, analog and flow alarm outputs ( see separate data sheet ) ■ Integral or remote high speed preset batch controller ( see separate data sheet ) Overview Turbopulse turbine flowmeters are precise, reliable and robust units for the volumetric flow measurement of clean low viscosity liquids. Stainless steel construction with tungsten carbide bearings provides long life with a wide range of aggressive and non-lubricating liquids in petrochemical and general industrial applications. Fifteen sizes cover flows from 0.11 to 7000 m3/hr (0.5 to 30000 USGPM) with +/- 0.5% linearity. Enhanced linearity is available in larger sizes where custody transfer performance is required. The standard pick-off coil is supplied with either a military style plug or a junction box with terminal strip. Integral preamplifiers are available for harsh environments, to extend transmission distance or to interface with secondary instruments that require a conditioned signal input. An integral RT100 series flowrate totaliser is optionally available to provide local indication with 4-20mA and Hi/Lo flow alarm outputs and/or scaleable pulse output. Calibration Sizes 25mm (1") and larger are calibrated on positive displacement prover loops in accordance with current API standards. For each meter size calibration is performed at five points across the nominal flow range to ensure optimum performance in every application.

MODEL NUMBER r* Junction box, Exd preamplifier, Exd F/I convertor options MODEL NUMBER Note: All dimensions are nominalQUALITY AND SIMPLICITY FLOW

IN THE INTERESTS OF PRODUCT DEVELOPMENT TRIMEC RESERVES THE RIGHT TO ALTER THE DESIGN AND SPECIFICATIONS WITHOUT NOTICE ©

CONNECTION SIZE FLOW RANGE HEAD OFFICE & FACTORY 2/1 KOONYA CIRCUIT, TAREN POINT, SYDNEY, N.S.W. AUSTRALIA Tel : +61 2 9540 4433 Email : sales@trimecind.com.au Website : www.trimecind.com BODY MATERIAL 304 stainless steel 316 stainless steel PROCESS BSPP threaded NPT threaded * Tri-clamp ferrules (body material 316ss [ V ] only) ANSI 150 RF flanges ANSI 300 RF flanges PN10 flanges PN16 flanges PN25 flanges Special PROCESS CONNECTION MATERIAL TRIMEC EUROPE LTD Floor 3, 5A Boltro Road HAYWARDS HEATH WEST SUSSEX UNITED KINGDOM RH16 1BP Tel : +44 144 441 7880 Website : www.trimecind.com...