Technical Specifications of PUROIL 100 MP and PUROIL T 100 Units

This document provides technical data for two industrial units: PUROIL 100 MP and PUROIL T 100, manufactured by FILTER COMM s.r.l.

1. General Information

• Manufacturer: FILTER COMM s.r.l.
• Contact: [email protected] | +39 035 243853
• Website: www.filtercomm.it

2. Electrical and Performance Parameters

Both units specify power ratings in kW and HP, operating voltage and frequency (V|Hz), and pressure values in mBar. Flow rates are indicated in cubic meters per hour (m³/h) and liters per second (L/sec).

3. Physical and Acoustic Characteristics

• Dimensions are provided in millimeters (mm).
• Noise levels are measured in decibels (dB(A)).
• Weight is given in kilograms (Kg).
• Tank or container volumes are specified in liters (Lt).

4. Summary of Key Parameters

Although exact numerical values are not fully detailed in the document, the key parameters include:

• Power: kW and HP ratings for motor or unit operation.
• Voltage and Frequency: Electrical supply requirements.
• Pressure: Operating pressure ranges in mBar.
• Flow Rate: Air or fluid flow capacity in m³/h and L/sec.
• Dimensions: Physical size for installation planning.
• Noise Level: Acoustic emission for workplace compliance.
• Weight and Volume: For handling and capacity considerations.

5. Recommendations and Usage

The document serves as a technical sheet for specifying unit capabilities and installation requirements. Users should refer to these parameters to ensure compatibility with system needs and regulatory standards.

6. Contact and Support

For further technical details or support, contact FILTER COMM s.r.l. via the provided email or telephone.