Filtration solution for air intake systems used in various turbine machinery
12Pages

{{requestButtons}}

Catalog excerpts

Filtration solution for air intake systems used in various turbine machinery - 1

Filtration solution for air intake systems used in various turbine machinery for individual Gas Turbine sites. Thanks to many years of experience Filt Air Ltd. is a leading company in the air filtration field, and offers a wide range of air filters as well as filtration systems of the highest standards with excellent performance. Our products are designed for various conditions including coastal regions, sandy deserts, tropics and others. Gas Turbine performance is negatively impacted by inlet air flow restrictions, therefore the high efficiency air filtration can improve turbine or engine performance. Low initial pressure drop and slow increase of pressure drop during operation provide the turbine improved performance. Technical support Our technical support can help our customers to analyze their environmental situation, in order to find the best technical and economical solution Fine Dust - HEPA / ULPA Filt Air Ltd. serves its customers with quality products, timely delivery and excellent technical service. FILT AIR Ltd. Fine Dust Filter Final Filter for Fan Filter Units Final Filter for Clean Rooms Final Filter for Channel Installation Highly Active Filter Surface Low Pressure Drop Final Filter for Grid Systems

Open the catalog to page 1
Filtration solution for air intake systems used in various turbine machinery - 2

Type G80 (Bag Filter) The G80 Bag Filters are designed to remove large quantities of coarse particles. The G80 Bag Filters are made of synthetic fibers which are thermally bonded to secure a strong and rigid filter media. Bag filters are mainly used as pre/first stage filters in the gas turbine air inlet. The G80 Bag Filters are made of a rigid plastic frame which is fully recyclable. The filters have a foamed gasket at downstream and/or upstream side to ensure absolute tightness between filter and frame housing. Type GV8 (V-Cell Filter) The GV8 V-Cell Filter can be manufactured in various...

Open the catalog to page 2
Filtration solution for air intake systems used in various turbine machinery - 3

Type G80 (Bag Filter) The G80 Bag Filters are designed to remove large quantities of coarse particles. The G80 Bag Filters are made of synthetic fibers which are thermally bonded to secure a strong and rigid filter media. Technical data The G80 Bag Filters are made of a rigid plastic frame which is fully recyclable. The filters have a foamed gasket at downstream side to secure an absolute tightness between filter and frame. Recommended final pressure drop: 250 Pa Other dimensions are available on request / / / t s s B Bag Length C D E Quantity of Bags F Media G Order Numbers Efficiency...

Open the catalog to page 3
Filtration solution for air intake systems used in various turbine machinery - 4

Type GV8 (V-Cell Filter) The GV8 Full Plastic Compact Prefilter is designed to meet the strictest requirements in gas turbine applications. Each GV8 Full Plastic Filter contains eight (8) 'Minipleats-Media Packs' cast in V-cell technology to achieve the lowest Features: • High quality for various application in Gas Turbine • Lowest initial pressure drop • High quality standards due to Quality Assurance System • Highly economical through high final pressure drop • Any airflow direction possible making installation easy Design The side covers of the filter are made from rigid plastic with...

Open the catalog to page 4
Filtration solution for air intake systems used in various turbine machinery - 6

Type GR0 (Cylindrical Filter) The GR0 cylindrical filter cartridges are especially designed to meet the strict demands of gas turbine air filtration systems. The filter media used in these filters provides high protection to gas turbines. The outstanding durability and the high efficiency of the filter media decreases Features: • For use in gas turbine air filtration systems with backpulse cleaning • High strength filtration media for every environment condition • Filter is pulse cleanable Design The filter has two zinc-coated steel (stainless steel / powder coated) end-caps on each end....

Open the catalog to page 6
Filtration solution for air intake systems used in various turbine machinery - 7

Technical Data Size (LxD) mm 660x324 660x324 660x324 * Nano coated blend media Pressure Drop EPA 9rades available on request ▲ Order Numbers Order no. GR0 Example GR0 A Specifications are subject to change without prior notice

Open the catalog to page 7
Filtration solution for air intake systems used in various turbine machinery - 8

Type GRV & GR0 (Conical & Cylindrical Filter) The GRV conical filter cartridges are especially designed to meet the high demands of gas turbine air filtration systems. The special filtration media provides maximum protection for the turbine. The outstanding durability and the high efficiency of the filter media decreases the risk of dust entering due to media failure and to high dust penetration. The filters are available in both self-cleaning pulse and static type and are suitable for vertical and horizontal design. Typical range from F7 or MERV 13 up to EPA grade. Available also in...

Open the catalog to page 8
Filtration solution for air intake systems used in various turbine machinery - 9

Technical Data Type: CYL-CONE CYL-CYL CYL-CONE CYL-CYL CYL-CONE CYL-CYL * Nano coated blend media EPA grades available on request Filter media Specifications are subject to change without prior notice

Open the catalog to page 9
Filtration solution for air intake systems used in various turbine machinery - 10

Type GV2 The GV2 V-Cell air inlet filter is designed to meet the strictest requirements in gas turbine applications. The filter media used in these filters has a long lifetime with a high tensile strength and a low pressure drop. The filter has good surface filtration through Nano coating technology, with a large filtration area. The outstanding durability and the high efficiency of the filter media provides high protection to gas turbines. Features • High quality standards due to Quality Assurance System • Allows easy service and quick replacement • Long lifetime media with high tensile...

Open the catalog to page 10
Filtration solution for air intake systems used in various turbine machinery - 11

Description Filter shape Nominal Flowrate Filter class Recommended final pressure drop Maximum recommended operation Temperature Maximum recommended operation Humidity Filter Media Filtration area Pleating height End caps Inner mesh Outer mesh Sealant Material Pleat spacers Nano coated blend / Nano coated fully synthetic / ePTFE membrane media / Multi layer Media 50 (m2) Galvanized steel (stainless steel / powder coated steel optional) Expanded galvanized steel (stainless steel / powder coated steel optional) Expanded galvanized steel (stainless steel / powder coated steel optional) Hotmelt...

Open the catalog to page 11
Filtration solution for air intake systems used in various turbine machinery - 12

Company Profile: Filt Air Ltd. specializes in the production of air filtration products for the supply of clean air. Our wide range of products is designed to provide superior quality, while offering both safety and reliability for product availability at an optimum price. In 1998 Beth-El Zikhron Yaaqov Industries Ltd. separated the clean room business from the NBC filtration branch by founding the subsidiary Filt Air Ltd. Based on the knowledge and expertise of the mother company, we offer a large range of filters to suit our customer’s needs for all applications. After the company was...

Open the catalog to page 12

All FILT AIR catalogs and technical brochures

  1. Filt Air’s

    8 Pages

  2. Type G09

    4 Pages

  3. Type GRO

    4 Pages

  4. Type HT

    6 Pages

  5. Type GP

    8 Pages

  6. Type GW

    6 Pages

  7. Type GVA

    4 Pages