CONCRETE SPRAYING MACHINE

Concrete spraying machine SSB14 have been designed for spraying concrete and refractory mixtures inthe so-called dry way when the transported mixture gets moistened at the moment of spraying. SSB concrete spraying machines are used, in particular, to reinforce surfaces of engineering structures, and the construction of water works, to reinforce teh vaulting of tunnels and collectors in underground engineering and to maintain concrete constructions. Visit FILAMOS Youtube channel for practical demonstration of the machine by clicking on Youtube picture or Gunite machines SSB FILAMOS WORKING PRINCIPLE...

OPTIONAL EQUIPMENT - different sizes of dosing rotor - automatic central lubrication system for greasing of rotor and sealing plates - possibility of remote control of the machine in the length of 60 meters - water separator (to separate excess water from the air supplied) - solid frame modification (standard delivery - wheel frame) The machine is delivered with optional accessories set corresponding with required output. Each type of accessories set differs from each other by an inner diameter of transport hose. Marking DN xx (e.g. DN40 = transport hose with an inner diameter 40 mm). Reccomended...

Manometer Control box equipped with frequency converter allowing fluent change of machine output by lowering increasing revo-of the drum Manual lubrication is an alternative to optional Automatic lubriacation. It allows perfect greasing of rotor and sealing plates Air inlet with required air of 0.5-0.6 MPa. air hose is connected either to one DN 40 SSB 14.1 STANDARD Air inlet to vibrator

! The actual output depends on the design and moisture of transported mixture, the volume and pressure off the compressed air. the transport distance, the diameter of the transport hose and the way of filling the material. WORKPLACE PREPARATION NOZZLES MATERIAL A MAINS CONNECTION - 3xPEN 400, 50Hz - input: 3 kW - power take-off: cca. 7 A - plug: 16A (5 Pin) Nozzle DN 40 AL Nozzle built from aluminium body, water inlet and rubber ending is being standardly used with SSB 14. The nozzle is equipped with aluminium handle for easier manipulation. Construction of the nozzle allows perfect wetting of...

Hate 54G. 2BI 01 Pribram Czech Republic