CONCRETE SPRAYING MACHINE

WORKING PRINCIPLE Shotcreting machine SSB 02 works on the rotor principle and it is designed for the processing of dry or wet mixtures. It is the most efficient model of the shotcreting machines (concrete spraying machines) series SSB and it is appropriate to execute works of medium and large scope. It is used, in particular, to reinforce surfaces of engineering structures and the construction of water works, to reinforce the vaulting of tunnels and collectors in underground engineering and to maintain concrete constructions. The machine may be used in media with temperatures ranging from +5...

- different sizes of dosing rotor - automatic central lubrication system for greasing of rotor and sealing plates - cable remote control of the machine in the length of 40 meters - water separator (to separate excess water from the air supplied) - solid frame modification (standard delivery - wheel frame) The machine is delivered with optional accessories set corresponding with required output. Each type of accessories set differs from each other by an inner diameter of transport hose. Marking DN xx (e.g. DN50 = transport hose with an inner diameter 50 mm). Reccomended set of accessories consists...

SSB 02 DUO Large hopper includes built-in sieve for safety (skewed alternatively) Air vibrator with a smooth vibration, it allows fluent flow of the material into the rotor Output switch (lower / higher) Tightening screws to be tightened equally to achieve best sealing effect. Automatic lubrication system for lubrication of rubber sealing plates solved with Automatic system, or by Manual system, with lever press Air inlet with required air pressure of 0,5 - 0,6 MPa, air hose is connected either to one DN50, Quick-coupling to connect material hose Eyes for lifting-up with the crane Solid steerable...

Nozzle AL Nozzle built from aluminium body, water inlet and rubber ending is being standardly used with SSB 02. The nozzle is equipped with aluminium handle for easier manipulation. Construction of the nozzle allows perfect wetting of the mixture. Nozzle POLY Complete one piece POLY nozzle made of polyurethane is used alternatively. * The actual output depends on the design and moisture of transported mixture, the volume and pressure off the compressed air, the transport distance, the diameter of the transport hose and the way of filling the material. TECHNICAL DATA - WET METHOD The wet shotcrete...

WORKPLACE PREPARATION - DRY METHOD MATERIAL - grain size: max. 16 mm (hose DN 50 / DN 60) max. 20 mm (hose DN 60 / DN 65) - moisture: max. 3 - 5 % WATER HOSE - pressure min. 0,3 MPa MAINS CONNECTION - 3xPEN 400, 50Hz - input : 7,5 kW - power take-off: 15,4A - plug: 32A (5 PIN) COMPRESSOR - output - 8 - 10 cbm/min (valid for horizontal material conveying - 40 m) - pressure: 0,5 - 0,6 MPa MATERIAL HOSE - DN 50 / DN 60 / DN 65 (depending on rotor size) REDUCER 2 X DN 20/25 - DN 50 - compressor with an air outlet DN 50 is connected directly - without a reducer WORKPLACE PREPARATION - WET METHOD MATERIAL...

Hate 546, 261 01 Pribram Czech Republic