PRODUCT INFORMATION Applications: * Factory calibrated * Refrigerant gas leak detection in air * Temperature compensation circuit conditioning/refrigeration systems * Resistant to interference gases * Compact embedded type module * Meets IEC60335-2-40 and JRA4068 requirements FCM2630-C01 is an embedded type module using the semiconductor gas sensor TGS2630 which is optimized to detect A2L refrigerant gas R-32. This module enables users to easily build a reliable gas leakage detection system by eliminating electronic circuit design for temperature compensation and the calibration process. In addition, a connector allows easy replacement of the gas sensor module for periodic maintenance. The TGS2630 gas sensor has a built-in filter to reduce the influence of alcohol and other interference gases, resulting in high selectivity to R-32. For more detailed information on the gas sensor, including sensitivity characteristics, see TGS2630 Product Information. FCM2630-C01 is capable of satisfying the IEC60335-2-40 Edition 6.0 Annex LL and the JRA4068:2016R (Performance 3) standards. The applicable standards are both limited to refrigerant gas type R-32. Circuit Diagram Connector model: S05B-PASK-2 (made by JST) Recommended receptacle for connector: PAP-05V-S (made by JST)

Structure and Dimensions Model No. side view NOTE 1: Sensor module performance may be affected if exposed to a high concentration of gas during an operating or storage period. Replace the gas sensor module if it is exposed to gas equivalent to 10,000ppm or more of R-32. NOTE 2: If the internal temperature near the gas sensor module becomes higher than the external ambient temperature by 10°C or more due to heat generated by electronic components in a device into which this gas sensor module is incorporated, the set alarm threshold may drift. Please consult with Figaro if there is difficulty in...