*mydirectindustry

Catalogs
FIBRO GmbH
Roller Slide Unit 2017.33./2017.43. | german | english

Roller Slide Unit 2017.33./2017.43. | german | english

1 / 16 PagesView full catalog

Roller Slide Unit 2017.33./2017.43. | german | english

Product catalog summary

Overview

This document details the technical specifications, assembly instructions, and ordering information for FIBRO's third-generation roller slide units, designed for high-force tooling and automation applications. These units are part of the LÄPPLE Group product portfolio.

1. Product Description

The roller slide units are engineered to withstand high working forces of 72 kN, 153 kN, and 160 kN. They feature gas pressure springs for slide return with restoring forces ranging from 170 daN to 500 daN, depending on unit type and stroke length. An optional mechanical return unit with rollers is also available.

2. Technical Specifications

Working Forces: 72 kN, 153 kN, 160 kN
Return Mechanism: Gas pressure springs (170–500 daN) or optional mechanical roller return
Stroke Lengths: 50 mm, 80 mm, 100 mm, 120 mm, 170 mm
Materials: Ck45, 16NiCrMo4, bronze with solid lubricant (CuZn25Al + graphite), 100Cr6 steel

3. Assembly and Disassembly Procedures

Comprehensive video instructions for assembly and disassembly of sliding blocks and return units (gas spring and mechanical roller) are available online via the FIBRO website under Standard Parts > Cam Units > Roller Gates.

4. Working Angle and Stroke Relationship

The minimum angle between the driver (cam) and slide must be 50°. The press stroke depends on this assembly angle. Detailed tables and diagrams correlate working angle, slide stroke, and driver stroke to optimize performance and durability.

5. Maximum Permissible Working Forces

Tables specify maximum allowable forces (in kN) on various slide surface areas, considering width and height, to ensure safe operation and prevent premature wear or failure.

6. Exploded View and Spare Parts

An exploded diagram identifies all components: cam base, wear plates, impact strips, cam slider, covers, spindle, driver roller, impact unit, dampers, gas springs, circlips, and screws. Materials and quantities are listed to facilitate maintenance and replacement.

7. Ordering Information

Each roller slide unit and its components have specific order numbers. Optional mechanical return units with rollers are ordered separately. Ordering codes cover various configurations including stroke length, working angle, and key width. Surface treatments such as driver cam hardening are noted.

8. Key Parameters and Limitations

Minimum driver-slide angle: 50°
Working forces limited to specified kN values per model
Return spring forces vary by stroke and unit type
Assembly must follow prescribed sequences for safety and functionality

9. Recommendations and Best Practices

Use gas springs or mechanical return units according to application needs
Consult online videos for correct assembly/disassembly
Strictly adhere to maximum permissible forces and angles to avoid damage
Order spare parts using exact item numbers to ensure compatibility

10. Detailed Technical Specifications and Ordering

The document specifies two main series of roller slide units with detailed force parameters and stroke options:

Series 2017.43.00.120: Stroke lengths of 50, 80, and 100 mm with extraction forces from 190 to 240 daN, working forces 116 to 166 daN, initial spring forces 46 to 96 daN, final spring force 530 daN, and max load capacity 153 kN.
Series 2017.43.00.170: Stroke lengths of 50, 80, and 100 mm with extraction forces 200 to 250 daN, working forces 123 to 173 daN, initial spring forces 47 to 97 daN, final spring force approximately 710 daN, and max load capacity 160 kN.

Return units with rollers are optional and must be ordered separately (item no. 11). Mechanical dimensions such as diameters (e.g., ø12H7, ø14), lengths, tolerances (±0.01 mm), and thread sizes (M16) are precisely specified to ensure compatibility and proper installation.

11. Summary Table of Critical Parameters

Order No.	Stroke (mm)	Extraction Force (daN)	Working Force (daN)	Initial Spring Force (daN)	Final Spring Force (daN)	Max Load (kN)
2017.43.00.120.050.2	50	190	116	46	530	153
2017.43.00.120.080.2	80	220	146	76	530	153
2017.43.00.120.100.2	100	240	166	96	530	153
2017.43.00.170.050.2	50	200	123	47	720	160
2017.43.00.170.080.2	80	230	153	77	710	160
2017.43.00.170.100.2	100	250	173	97	710	160

Note: Forces are in decaNewtons (daN), load capacities in kiloNewtons (kN), and stroke lengths in millimeters (mm).

12. Manufacturer and Contact

FIBRO GmbH, part of the LÄPPLE Group, Germany, is the manufacturer. Contact details and website are provided for further technical support and ordering.

Conclusion

The FIBRO third-generation roller slide units are robust, high-performance components tailored for demanding tooling and automation environments. The document provides comprehensive technical data, assembly guidance, and ordering details to ensure correct selection, installation, and maintenance, guaranteeing reliable operation within specified mechanical limits.

Catalog excerpts

Roller Slide Unit 2017.33./2017.43. | german | english-1

COULISSEAUX À ROULEAU ROLLER SLIDE UNITS 2017.33./2017.43. FIBRO GMBH THE LÄPPLE GROUP LÄPPLE AUTOMOTIVE FIBRO LÄPPLE TECHNOLOGY T +49 6266 73-0 info@ﬁ bro.de www.ﬁ bro.com

Open the catalog to page 1

Roller Slide Unit 2017.33./2017.43. | german | english-3

COULISSEAUX À ROULEAU ROLLER SLIDE UNITS Description Les coulisseaux FIBRO de 3ème génération sont conçus pour The FIBRO third-generation roller slide units are suited for une grande puissance de travail. higher working forces. Puissance de travail disponible 72 kN, 153 kN et 160 kN. Working forces of 72 kN, 153 kN, and 160 kN are available. Le retour du coulisseau est assuré par des ressorts à gaz For the slide unit return, gas pressure springs with a restoring d’une force comprise entre 170 daN et 500 daN cela dépend force between 170 daN and 500 daN are used depending on du coulisseau à rouleau...

Open the catalog to page 3

Roller Slide Unit 2017.33./2017.43. | german | english-4

ICOULISSEAUX A ROULEAU ROLLER SLIDE UNITS Etapes successives pour le montage et le demontage Sequence for assembly and disassembly Video Assembly/Disassembly Gas spring, see: https://www.fibro.com ^ Standard parts ^ Cam Units ^ Roller Gates Video Montage/Demontage Coulisseau - retour mecanique, voir : https://www.fibro.de/fr/ ^ Elements normalises ^ Coulisseaux pour la fabrication d'outils ^ Coulisseaux a rouleau Force maximale admissible Les tableaux suivants montrent la surface de travail du coulisseau et donnent la force maximale (en kN), a appliquer dans differentes positions de la surface....

Open the catalog to page 4

Roller Slide Unit 2017.33./2017.43. | german | english-5

Angle du coulisseau L'angle entre came et coulisseau ne doit pas etre inferieur a 50°. La course de la presse est fonction de l'angle de montage du coulisseau a rouleau (voir tableau ou diagramme ci-dessous). Slide angle Ensure that the angle between the driver and the slide is not less than 50°. The press stroke depends on the assembly angle of the roller slide unit (see table or diagram). Angle de travail Course du coulisseau Working angle Slide stroke

Open the catalog to page 5

Roller Slide Unit 2017.33./2017.43. | german | english-6

COULISSEAUX À ROULEAU ROLLER SLIDE UNITS Vue eclatee Exploded diagram 21 sous réserve de modifications

Open the catalog to page 6

Roller Slide Unit 2017.33./2017.43. | german | english-7

COULISSEAUX A ROULEAU ROLLER SLIDE UNITS Pieces detachees Spare parts

Open the catalog to page 7

Roller Slide Unit 2017.33./2017.43. | german | english-8

■ CAME POUR COULISSEAU A ROULEAU DRIVER FOR ROLLER SLIDE UNIT Sp = Course de la presse Wa = Angle de travail Wk = Angle de la came .06 = rotation anti-horaire rotating left .05 = horizontal horizontal .07 = rotation horaire rotating right Remarque Surface de la came : trempe superficiellement Note Driver surface: surface hardened Exemple de commande : Ordering Code (Example) horizontal horizontal = 05. 06. =rotation anti-horaire /rotating left 07. = rotation horaire /rotating right Largeur de la came Width of key= 050. sous reserve de modifications subject to alterations

Open the catalog to page 8

Roller Slide Unit 2017.33./2017.43. | german | english-9

Coulisseaux a rouleau Came N° de commande N° de commande Roller slide units Driver Order No. Order No. a-i a2 a3 hi h2 h3

Open the catalog to page 9

Roller Slide Unit 2017.33./2017.43. | german | english-10

ICOULISSEAUX A ROULEAU ROLLER SLIDE UNITS a commander separement order separately, en option : Position 11 optional: Item No. 11 2017.33.00.094.00.11 Retour mecanique avec galet 2017.33.00.094.00.11 Return unit with roller Force de travail Working force 72 kN Force initiale du ressort Initial spring force 170 daN Force en fin de course du ressort Final spring force 280 daN N° de commande Course Ressort a gaz Force de rappel en daN Order No. Stroke a k Gas spring Extraction force in daN FIBRO sous reserve de modifications subject to alterations

Open the catalog to page 10

Roller Slide Unit 2017.33./2017.43. | german | english-11

order separately, optional: Item No. 11 2017.33.00.120.00.11 Return unit with roller a commander separement en option : Position 11 2017.33.00.120.00.11 Retour mecanique avec galet Force de travail Working force 153 kN Force initiale du ressort Initial spring force 320 daN Force en fin de course du ressort Final spring force 530 daN N° de commande Course Ressort a gaz Force de rappel en daN Order No. Stroke a c d k i r w Gas spring Extraction force in daN

Open the catalog to page 11

Roller Slide Unit 2017.33./2017.43. | german | english-12

ICOULISSEAUX A ROULEAU ROLLER SLIDE UNITS order separately, optional: Item No. 11 2017.33.00.094.00.11 Return unit with roller a commander separement en option : Position 11 2017.33.00.094.00.11 Retour mecanique avec galet Force de travail Working force 72 kN Force initiale du ressort Initial spring force 170 daN Force en fin de course du ressort Final spring force 280 daN N° de commande Course Ressort a gaz Force de rappel en daN Order No. Stroke a d k Gas spring Extraction force in daN FIBRO sous reserve de modifications subject to alterations

Open the catalog to page 12

Roller Slide Unit 2017.33./2017.43. | german | english-13

a commander separement order separately, en option : Position 11 optional: Item No. 11 2017.33.00.120.00.11 Retour mecanique avec galet 2017.33.00.120.00.11 Return unit with roller Force de travail Working force 153 kN Force initiale du ressort Initial spring force 320 daN Force en fin de course du ressort Final spring force 530 daN N° de commande Course Ressort a gaz Force de rappel en daN Order No. Stroke a d k Gas spring Extraction force in daN

Open the catalog to page 13

Roller Slide Unit 2017.33./2017.43. | german | english-14

ICOULISSEAUX A ROULEAU ROLLER SLIDE UNITS a commander separement order separately, en option : Position 11 optional: Item No. 11 2017.43.00.170.00.11 Retour mecanique avec galet 2017.43.00.170.00.11 Return unit with roller Force de travail Working force 160 kN Force initiale du ressort Initial spring force 471 daN Force en fin de course du ressort Final spring force 710 daN N° de commande Course Ressort a gaz Force de rappel en daN Order No. Stroke a d k Gas spring Extraction force in daN FIBRO sous reserve de modifications subject to alterations

Open the catalog to page 14

Roller Slide Unit 2017.33./2017.43. | german | english-16

FIBRO GMBH Département Eléments normalisés / Business Unit Standard Parts LÄPPLE AUTOMOTIVE FIBRO LÄPPLE TECHNOLOGY T +49 6266 73-0 info@ﬁ bro.de www.ﬁ bro.com MEMBER OF THE LÄPPLE GROUP

Open the catalog to page 16