FIBRO - The Safer Choice:  Properties of the Gas Spring DS Safety features AP Reliability features FIBRO Training energy efcient spring Flex Guide For additional information, refer to the fold out page of the flyer or visit www.fibro.de In line of reducing the set-up time while installing the tool in the press there are used autonomous acted gas springs for tool spacing. • Initial spring forces of 3000 daN to 7500 daN • Stroke lengths of 80 mm to 300 mm While using conventional gas springs they are activated with every press stroke about the whole stroke length. • Standardised dimensions in accordance...

Application example: However, this slow speed does not have any negative impact on the end position (gas springs fully extended) of the return stroke at the end of production. The piston rod is actuated oscillating up to 10% of the entire stroke, depending on the production rate. The return stroke speed in the gas springs, DS is very slow. The complete return stroke takes 1-2 minutes. When using "conventional" standard gas springs (such as 2480.13.05000.250) for creating spacing between the top and bottom parts of the tool, additional initial forces of 20 t are exercised when each stroke is performed....

FIBRO Reliability Features Flexible guides: The Flex GuideTM System Flex Guide The Flex GuideTM System is a flexible guide in the gas spring which absorbs lateral movements of the piston rod. It minimises friction and lowers the operating temperature. The benefits are: •  xtended service life E •  ncreased stroke frequency, i.e. more strokes per I minute Safe hose connections: The Dual SealTM System Dual Seal The FIBRO Dual SealTM System combines a metal seal with a soft elastomer seal. On hose connection systems, the system provides two leak-tight connections and prevents rotation. The benefits...

FIBRO safety features FIBRO - The Safer Choice At FIBRO, safety and reliability are paramount. Particularly when it comes to our gas springs. With their unique range of safety features, FIBRO gas springs are the safest on the market. PED approval for 2 million strokes FIBRO gas springs are developed, manufactured and tested for 2 million full strokes* in accordance with DGRL97/23/EG. The springs deliver this full performance at the maximum permissible limits in terms of filling pressure and operating temperature - even when combined with any of the various mounting types available. * Unless specified...

Standard Parts FIBRO GmbH August-Läpple-Weg 74855 Hassmersheim T +49 6266 73-0 F +49 6266 73 237 [email protected] CN FIBRO (Shanghai) STANDARD PARTS CO., LTD. 1st Floor, Building 3, No. 253, Ai Du Road Pilot Free Trade Zone, Shanghai 200131 T +86 21 60 83 15 96 F +86 21 60 83 15 99 [email protected] FIBRO KOREA Co., LTD. Namdongsanggong Bd. 401ho 632-1, Gojan-Dong, Namdong-Gu Incheon, 405-817 T +82 32 821 0130 ~1 F +82 32 821 0030 [email protected] www.fibro.com 08/2015 © Copyright by FIBRO GmbH IN FIBRO INDIA PRECISION PRODUCTS PVT. LTD. Plot No: A-55, Phase II, Chakan Midc, Taluka Khed, Pune -...