Catalog excerpts
![Catalog PDF (Peripherie) - 1](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_1m.jpg)
PERIPHERAL EQUIPMENT
Open the catalog to page 1![Catalog PDF (Peripherie) - 2](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_2m.jpg)
Press and tools products Ball bearing inserts and rails If you need fast and reliable tool changing, you will find that equipping or updating your press with ball bearing inserts and rails is the ideal solution. With ball bearing inserts and rails you can move or change tools fast, and above all accurately - even if they weigh several tons. In the past this has often been an awkward, inconvenient and sometimes even critical process. Equipping and retrofitting press tables with ball bearing rails is extremely straightforward as virtually every press table has fixing slots. The ball bearing...
Open the catalog to page 2![Catalog PDF (Peripherie) - 3](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_3m.jpg)
Electronic Thread Moulding Counter view, mechanical Ball bearing insert without collar Ball bearing insert with collar Conveyor belts, electrical -Description and ordering guidelines Ball bearing rail Conveyor belt, electrically contolled Roller insert without collar Conveyor belt, electrically contolled Roller insert with collar Conveyor belt, electrically contolled Roller rail Conveyor belt, electrically contolled Delimiting guide for conveyor belt J4 FIBRO subject to alterations
Open the catalog to page 3![Catalog PDF (Peripherie) - 4](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_4m.jpg)
Delimiting guide for conveyor belt 2195.120./121. Stand for conveyor belt, with adjustable slope Delimiting guide for conveyor belt Stand for conveyor belt, table frame Delimiting guide for conveyor belt Stand for conveyor belt, double Delimiting guide with loss prevention for conveyor belt Delimiting guide with loss prevention for conveyor belt Electro-mechanical transporters -General information Delimiting guide with loss prevention for conveyor belt 2195.221. J31 Delimiting guide with loss prevention for conveyor belt Electro-mechanical transporter -vertical gear position 2299.002 J39...
Open the catalog to page 4![Catalog PDF (Peripherie) - 5](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_5m.jpg)
Electro-mechanical transporter horizontal gear position, with profile and support Electro-mechanical transporters Distance Electric transporter, BLACK LINE Control unit BLACK LINE Electro-mechanical transporters Fastening element Transporter electrical Electro-mechanical transporters Fastening element with height adjustment system Electro-mechanical transporter horizontal centre gear position, two slides, with profile and support Electro-mechanical transporters Angled mounting with adapter plate Electro-mechanical transporter vertical centre gear position, 2 carriages, with profile and...
Open the catalog to page 5![Catalog PDF (Peripherie) - 6](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_6m.jpg)
CONTENTS 2299.60.81.01. Signal cable straight, to the press Electric transporter, CLEAN LINE Mounting tool Angled section for clamping bar Channel fastening standard, including slot stone Channel fastening standard Sealing cap for connection cable Channel fastening topmount Profiled beam Sealing cap for electric transporter Channel fastening undermount Control unit CLEAN LINE Height-adjustable mounting bracket Height-adjustable mounting bracket, for beam mounting
Open the catalog to page 6![Catalog PDF (Peripherie) - 7](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_7m.jpg)
2191. Sensors for stamping and forming technology FIBRO subject to alterations
Open the catalog to page 7![Catalog PDF (Peripherie) - 8](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_8m.jpg)
ELECTRONIC THREAD MOULDING PATENTED further information on request
Open the catalog to page 8![Catalog PDF (Peripherie) - 9](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_9m.jpg)
The electronic thread moulding unit, specially designed for punching and forming processes, stands out thanks to its excellent process integration. Regardless of whether the electronic thread moulding unit is used in progressive dies or progression tools, in presses or in automatic punching and bending machines, the desired threads are created in a reliable and controlled fashion. This improves thread quality, increases reliability and ensures quick, cost-effective production. Flexibility The electronic thread moulding unit can be used in a wide variety of presses, progressive dies and...
Open the catalog to page 9![Catalog PDF (Peripherie) - 10](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_10m.jpg)
The controls and the servo regulator for the drives are located in the control box. The size of the control box varies according to the number of systems that must be controlled. The control unit can regulate up to 6 independent drives. 10 programmes per unit allow unrestricted programming of the parameters (rotation speed of the leader, limitation of the torque, number of rotations of the leader, cycle time, batch counter, process data monitoring). Data storage may also take place, which serves to record all the torque values. The moulding head transforms horizontal rotation into vertical...
Open the catalog to page 10![Catalog PDF (Peripherie) - 11](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_11m.jpg)
Note: The supporting ball bearings raise the object to be moved (tool) away from the table surface and replace the surface friction with rolling friction. This significantly reduces the force required to move the tool. Load capacity Ball Note: The supporting ball bearings raise the object to be moved (tool) away from the table surface and replace the surface friction with rolling friction. This significantly reduces the force required to move the tool. 2198.33.Ball bearing insert with collar Load capacity Ball Order No d m [daN] diameter e t l FIBRO subject to alterations
Open the catalog to page 11![Catalog PDF (Peripherie) - 12](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_12m.jpg)
Note: The ball bearing rails are pushed into the DIN 650 T-shaped grooves in the press table and are fixed in place by the clamping piece. The size and number of the ball bearing rails is determined by the size of the T-shaped groove and the load-bearing capacity required. Once the tool is clamped in place, it lies on the press table and the clamping pressure presses the ball bearings into the holes. * T-shaped grooves are not absolutely necessary. Load capacity Number Ball Order No am [daN] L of balls diameter f b* c* h x y
Open the catalog to page 12![Catalog PDF (Peripherie) - 13](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_13m.jpg)
Note: Roller inserts provide double the capacity of ball bearing inserts. Torsion protection is provided by the customer. Load capacity Roller Note: Roller inserts provide double the capacity of ball bearing inserts. Torsion protection is provided by the customer. 2198.35. Roller insert with collar Load capacity Roller Order No d m [daN] diameter e t l
Open the catalog to page 13![Catalog PDF (Peripherie) - 14](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_14m.jpg)
Note: Roller rails provide double the capacity of ball bearing rails. They ensure precise linear movement of the tool. Unlike ball bearing rails, roller rails can be used in tool base plates, i.e. installed upside down. * T-shaped grooves are not absolutely necessary. Load capacity Number of Roller Order No am [daN] L rollers diameter f b* c* h x y
Open the catalog to page 14![Catalog PDF (Peripherie) - 15](https://img.directindustry.com/pdf/repository_di/5302/catalog-pdf-peripherie-927724_15m.jpg)
Material: Base frame: Steel Track roller, version 01: Steel Track roller, version 10: Steel / radial deep-groove ball bearing Track roller, version 20: Steel / coated with polyurethane rubber Execution: Track roller, version 01: Standard Track roller, version 10: Standard, at high load of the track roller Track roller, version 20: Standard, for aluminium plates for skin panels Note: Delivery with cheese head screws DIN EN ISO 4762 M8x60 (2x). For order numbers for track roller spare part and compression springs, see table. Order No Execution Track roller Compression spring Spring rate...
Open the catalog to page 15All FIBRO GmbH catalogs and technical brochures
-
Flex Cam Unit
88 Pages
-
RECIRCULATING BALL BUSHES
12 Pages
-
THE CLEVER OPTION PILLAR CAM
2 Pages
-
AERIAL CAM UNIT 2016.27.
38 Pages
-
Standard parts
1355 Pages
-
Guide Elements
330 Pages
-
GROUND PRECISION COMPONENTS
247 Pages
-
NUOVI PRODOTTI NELL´AREA CURSORI
197 Pages
-
COMPOSITE PLATE SYSTEM
32 Pages
-
Composite Plate System
32 Pages
-
Catalog PDF (Elastomer)
33 Pages
-
Catalog PDF (Fibrochemie)
21 Pages
-
Standard Parts SYNOPSIS
32 Pages
Archived catalogs
-
Electro-mechanical transporters
12 Pages
-
Pneumatic transporters
4 Pages
-
BOLT LOCK SYSTEM
16 Pages
-
Spacer for die release
4 Pages
-
Projection Planning Manual
64 Pages
-
Standard Parts SYNOPSIS
16 Pages
-
ROTARY TABLES
7 Pages
-
Spring Plungers
4 Pages
-
2490.14. Compact gas springs
6 Pages
-
In-Die Tapping Units (FTU)
12 Pages