Pipe & Cable Entry Sealkits
4Pages

Pipe & Cable Entry Kits RETAIL FUELLING INDUSTRIAL COVERS TRENCH COVERS STEAM COVERS

The unique design allows a single hole installation. No additional screw holes need to be drilled. This provides the installer with a quick and easy installation and minimises potential leak paths through the sump wall. Our single sided and double sided entry sealkits will fit all types of primary pipework on the market. All sealkits are resistant to hydrocarbons and biofuels. For fill chamber system installations, where the entry boot will come into contact with biofuels E15 and B15 or higher, Fibrelite has you covered. Our Viton sealkit range is specifically designed to cope with such...

Entry Sealkits for Retractable Pipework Systems Our new range of entry sealkits are designed to seal between the outer duct and the secondary contained or primary pipe. The fitting is supplied with a Schrader valve to allow pressure testing and/or permanent monitoring of the interstitial space. All sealkits are resistant to hydrocarbons and biofuels. Fibrelite recommends our Viton range for biofuels E15 and B15 or higher. To order Viton models, simply add '-V' at the end of the code. Example PDBD-115-63-V. OPW Pipework Entry Sealkits Product Description Duct O/D Pipe O/D Flange Ring...

The PEC range of screw type fitting enables a quick and easy installation. Drill only one hole in the sump wall. Screw components together and tighten 1 locking screw. All sealkits are resistant to hydrocarbons and biofuels. Product Description PEC-27 Suitable for 3/4" steel conduit PEC-33 Suitable for 1" steel conduit PEC-50 Suitable for 11/2" steel conduit or 50mm pipe PEC2-33 Grounding cable seal to fit 1" steel conduit Suitable for Size Flange Ring Hole Size PEC2-50 Grounding cable seal to fit 11/2" steel conduit or 50mm dia. plastic pipe