Lay-up using Compoflex Superior peeling properties Controlled flow front No resin dust Time and cost savings Optional • Flow mesh incorporated • Secondary bonding surface Infusion Difficult release...? Peel ply Release film Flow mesh How can Compoflex® save production time and costs? The Compoflex® products are breathable microporous peeling materials, designed to replace up to three consumables with a single layer. Compoflex® offers direct benefits: • Superior peeling properties The microporous surface and the low surface tension of PP nonwovens ensure that Compoflex® releases at one-fifth of the force needed to peel conventional peel ply. Compoflex® can stay on the laminate for days without jeopardizing the easy peeling properties. • Controlled flow front For high-density and compact laminates, it is very important to have a controlled flow front. The random microporous perforation style ensures full impregnation of the laminate, thus eliminating dry areas. Furthermore overlapping is possible without jeopardizing laminate quality. It is important to note that the controlled flow front may require a change in set-up (more and/or bigger valves depending on laminate size and thickness). • Easy release minimises resin dust Compoflex® releases easily so that hardened resin remains in the liner, reducing the amount of airborne resin dust. The release force required when not using Compoflex® generates intensive resin dust activity, causing an unhealthy working environment. • Time and cost savings – less time in the mold Compoflex® RF replaces peel ply, release film and flow mesh. Fewer consumables combined with easy release reduce costs and handling time, simplifying the process considerably and thereby ensuring more output from the individual molds. Secondary Bonding Compoflex® SB • Excellent secondary bonding surface Compoflex® SB is designed to produce a surface ready for secondary bonding while maintaining the superior peeling properties of the standard Compoflex® products. Distributed by: Compoflex®: All-in-one!

Difficult release...? Peel ply Release film Flow mesh General info Composition: 100% PP except RF products: 67% PP (nonwoven) / 33% PET (grid) Resin: Works well with polyester, vinylester, epoxy, phenolic and other types of resin, but testing is always recommended. Surface preparation: Compoflex® SB products may reduce or eliminate the need for sanding or abrading. Best results achieved with epoxy resin, but testing is always recommended. Data and safety data can be downloaded from our web page www.compoflex.dk A secondary bonding test is also available. Eas yp ee lp ly Me d rel ium ea ble se...