New Compoflex® RF 3 for infusion Controlling the flow front without jeopardizing speed Infusion set-up Peel ply, release film P3, 160 g flow mesh RF 3 RF Resin: Viscocity: Laminate: Width: Hose: Vacuum: RF 3 – controlling the flow front Earlier when you wanted to benefit from the many advantages of Compoflex® RF for infusion, you had to accept lower infusion speeds in order to achieve the controlled flow front and the general benefits of Compoflex®: NOW, with Compoflex® RF 3 you can have it all! Tests have shown that the infusion speed of RF 3 is comparable to a standard infusion set-up using peel ply, release film P3 and 160 g flow mesh. Controlled flow front For high-density and compact laminates, it is very important to have a controlled flow front. The random microporous perforation style ensures full impregnation of the laminate, thus eliminating dry areas. Furthermore overlapping is possible without jeopardizing laminate quality. It is important to note that the controlled flow front may require a change in set-up (more and/or bigger valves depending on laminate size and thickness). Contact us For specific input on how Compoflex® will optimise your production time and costs, please contact your local distributor or Fibertex Nonwovens: Commercial Manager Jan Falden, [email protected] Direct phone +45 96 35 35 09 Mobile +45 40 72 96 43 · Easy peeling · Time and cost savings · More output from the mold · Less resin dust