Pan-and-Tilt Pipe Camera ANACONDA
1Pages

Pand-and-Tilt Push Camera • Pans 360o and Tilts 180o • 59mm (2.3") Ø IP68 Waterproof Camera Head • Working Length up to 80 meters (262ft). • 18 Super Bright LEDs • 5.7” color TFT monitor • Manual Image Focus • Image and Video capture • Easy to carry, easy to operate TECH SPECIFICATION: • CCD Type SONY Camera • Horizontal resolution: 700TVL • 5.7’’ TFT Color Monitor The ANACONDA PTW Side-Scanning Push Camera is a great tool for the inspection of vessels, tanks, ducts, cores, and pipe walls. These units feature a camera sensor which pans 360 degrees and tilts 180 degrees to view and capture every detail of your inspection. The camera head features a compact (59mm, 2.3”) detachable design which is completely waterproof and contains 18 super bright LED lights to provide consistent illumination. The light intensity can be easily controlled to avoid reflections, and the sensitive Sony CCD chip provides a crisp color image, and is protected by a thick glass dome. The imaging HUB features a 5.7” color TFT wide screen monitor with video (MPEG4/AVI) and image (MPEG) capture of your inspections saved directly to a micro-SD memory card. The data can also be transferred via a USB cable to your PC or Laptop. Included in the set is a specially designed protective rolling skid. Optional lengths for the push rod are 50 meters (164ft) or 80 meters (262ft). The battery pack provides 6 hours of continuous operation. While the power supply offers simultaneous system operation while recharging the battery. The ANACONDA PTW Pan-and-Tilt Push Camera is a must have for pipe, duct and tank inspections. • Resolution of Monitor: 720*576 • Diameter of the camera head: 59mm • Pan: 360degrees; Tilt: 180degrees • Focus: Manual • LED Lights: 18 LEDS • Brightness of the LEDs: 500cd/m2 with Manual Adjustment • Video format: MPEG4/AVI • Picture format: MJPEG • Memory card: 8Gb Micro-SD • USB interface: USB output • Length:50m or 80m • Protective roller skid: Included • Power Supply: DC 16.8V • Operation Time: Standby (LED off): 12hours; In operation( LED on): 6hours