TIS-8632
2Pages

6 Port 10/100/1000 Ethernet Switch – 4 Copper Ports with 2 SFP Optical Ports Overview Elegantly simple yet packed with an advanced feature set, the FiberPlex Technologies TIS-8632 is a powerful 6 Port 10/100/1000 Ethernet Switch. The unit features (4) RJ-45 UTP ports as well as (2) flexible SFP ports. Features: • 6 Ports – (4) 10/100/1000BASE-T Copper and (2) 1000BASE-X Optical • Flow control for full duplex and half duplex • Supports up to 10k byte JUMBO frame • Includes power adapter as well as a 3-position Phoenix™ Two or more TIS-8632 can be chained together via fiber to Shown configured as TIS-8632-L5B with 1310 nm Singlemode SFPs provide a distributed solution where isolation, distance, security and/or noise immunity is needed between nodes. Locally, an 8 copper x 2 optical switch can be created using a Passive SFP Cable Assembly between SFP ports. This cable saves cost by replacing (2) optical modules and a fiber cable with an inexpensive copper jumper. While this solution is only good for very short ‘jumper’ lengths, it provides flexibility for local port expansion. Applications: • VOIP • SCADA • Physical Security • IT Infrastructure • Industrial Controls • Networked Audio The TIS-8632 is housed in the commercial ‘Throw Down’ packaging. This version is designed to be a work horse unit in various commercial and industrial environments. It is powered either by a 9VDC ‘Wall Wart’ style supply (included) or via bussed power supplied through an integrated three pin Phoenix™ connector. Up to three TIS-8632 units can be installed in the optional 1U TDR-01 rack shelf or DIN rail mounted. IEEE 802.3-2008 GbE support The flexibility of the SFP ports allows for full 1000BASE-X support as defined by the IEEE 802.3-2008 standard. Simply by selecting the appropriate SFP module according to the chart below, a standards compatible GbE port can be created. Each SFP can actually be configured separately, this can be useful if neworks based on two different standards needs to be bridged. SUPPORTED STANDARDS IEEE Standard 10BASE‐T 100BASE‐T 1000BASE‐T IEEE Standard 1000BASE‐CX 1000BASE‐SX 1000BASE‐LX 1000BASE‐LX 1000BASE‐LX10 1000BASE‑EX 1000BASE‑ZX 1000BASE‑BX10 1000BASE‐T Copper UTP RJ‐45 Interface Cable CAT‐3 or better CAT‐5 or better CAT‐5e or better Optical SFP Interface Fiber Type λ (nm) Avg Transmitter Power (dBm) Copper n/a n/a Multimode 850 ‐6 Multimode 1310 ‐11 Singlemode 1310 ‐11 Singlemode 1310 ‐6 ‐2.5 Singlemode 1310 +2.5 Singlemode 1550 ‐6 Singlemode 1490/1310 Copper n/a n/a Standard Ordering Options TIS-8632-C – Unit with no SFP modules included TIS-8632-L22 – Unit with (2) 1310 nm Multimode SFP modules (SFP-MC24XC-3131-2) included. Conforms to IEEE 1000BASE-LX standard. TIS-8632-L5B – Unit with (2) 1310 nm Singlemode SFP Modules (SFP-SC24XC-3131-B) included. Conforms to IEEE 1000BASE-LX10 standard. Made in the USA by FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • sales@fiberplex.com DST8632 • 150522

6 Port 10/100/1000 Ethernet Switch - 4 Copper Ports with 2 SFP Optical Ports Typical Applications Remote Network • SCADA Sensors/Control • Networked Audio Distributed WiFi Secure Conference Room Made in the USA by FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • sales@fiberplex.com