SFP 3GBPS SDI TO HDMI/DVI CONVERTER SINGLE TRANSMITTER, MSA, TYPE D CONNECTOR Description COMING SOON! The SFP-HHDVT-0000-L is an electrical SFP transmitter module designed to convert SDI signals to an HDMI/DVI (High definition multimedia interface®/Digital Visual Interface) output without scaling artifacts. A copy of the reclocked SD/ HD/3G-SDI source is loopback to the host. Up to 8 channel of audio is supported and embedded in the HDMI signal. The SFP-HHDVT-0000-L provides module identification information, configuration and diagnostic monitoring through a 2 wire serial interface. It is also a hotpluggable solution for field system upgrade and maintenance. The SFP-HHDVT-0000-L is interchangeable with other MSA optical video SFP, coaxial SFP and SFP converter improving product flexibility. Ganged cages, belly-to-belly and superposed cage mountings are supported. The module provides reduced development risk and cost. The SFP-HHDVT-0000-L is Pb-free and ROHS compliant. Summary of Benefits Flexibility: Build a totally optimized system by mixing electrical SDI, NTSC/PAL converter, HDMI/DVI and optical video SFP Cost: Design cost effective system Modularity: Allow hot scalability and replacement of critical components wherever possible Density: Highest density ever achieved for SDI to HDMI/DVI and HDMI/DVI to SDI converters Interchangeable: Fully compatible with existing MSA video optical SFP, SDI SPF and SFP converters Hot-Pluggable: Swap without affecting system behavior Advanced Packaging: Support ganged cages, belly-to-belly and superposed cages mounting Green: The SFP-HHDVT-0000-L is Pb-free and ROHS compliant Typical Applications • Multi-channel/multi-media transport with WDM-16 • Cost effective SDI monitoring solution • Processing cards • SDI switchers • Video routers • Broadcast cameras Video Features: • MPTE 424M, 292M and 259M S compliant • DI Reclocked Loopback to host S connector • Supported format: 525/625, – 720p/1080i (50/59.94/60Hz), – 080p (23.98/24/15/29.97/30/50/5 1 9.94/60Hz) • HDMI/DVI Output: – 24 bit (3x8 bits) – RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4 – BW = 150Mhz – RGB Range (Full/SMPTE) – p to 8 channel audio de-embedU ding (PCM) – HDMI 1.4 Type D connector – HDMI Type D plug with retention • Control via serial interface including: – Voltage & Temperature Monitoring – HDMI/DVI interface configuration – EDID reading, Audio mapping – Module Information • ow Power Consumption L • ingle Supply +3.3V S 58.5mm x 13.4mm x 8.6mm SFP Package Operating temperature: 0°C to 70°C Used With Model Wave Division Multiplexer FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • [email protected]