Fiberplex LightViper Brochure
8Pages

FIBER OPTIC TRANSPORT SYSTEM FOR PROFESSIONAL AUDIO AND MEDIA APPLICATIONS

LightViper Components VIS-1832— The VIS-1832 is the normally used as the “head” end (stage) device. It is intended for applications where analog mic/line level inputs will be used. It contains (32) analog inputs on Neutrik Combo connectors. Each input contains a mic pre-amp, each with a 3 position gain switch and individual LED clip indicators which begin to illuminate at 3dB before clipping. There are (4) +48v phantom power on/off switches that activate phantom power in groups of (8). There are (8) analog line level outputs (returns) on XLR connectors. The VIS-1832 contains a primary...

LightViper Components VIM-1032— The VIM-1032 is used on the “tail” end of the optional system splits, to feed a monitor console, broadcast truck, or recording system. The VIM-1032 is exactly the same as the VIM-1832 with two exceptions - the VIM-1032 does not have inputs and cannot be a clock master in the system. This unit has (32) outputs and (0) inputs. See part numbering key on pg. 7 VIM-1808/0808— The VIM-1808 / 0808 combination is an 8x8 fiber optic transport system. Both units are identical except the 1808 contains both the internal clock as well as a “clock in” connection while the...

LightViper Components VIM-MY32 Card Series — Fiber-Optic YGDAI cards for Yamaha™ digital consoles The MY32 YGDAI Cards enable users of Yamaha digital consoles and devices containing YGDAI card slots to interface with LightViper™ VIS-1832 & VIS-4832 devices via direct digital fiber-optic input to the console, yielding a completely digital fiber optic link. VIM-MY32M – This master card provides (16) inputs (sends from stage) to the console, and (8) outputs (returns to stage). The VIM-MY32M can be fit with LC, ST, Neutrik Duo, Neutrik Quad or TAC4 fiber optic connectors. For systems containing...

DMX4 Lighting Control Multiplexer —The DMX4 lighting control multiplexer consists of two units; the DMX4i input unit and the DMX4o output unit. These devices allow the transport of (4) universes of DMX lighting control, or (3) universes plus Yamaha RS422 control from FOH to stage on the same fiber as the (8) audio returns. No additional fiber is required to add DMX4 units to your system. Each unit contains (4) 3-pin XLR and (4) 5-pin XLR inputs / outputs, a 9 pin connector for Yamaha RS422 control. Neutrik EtherCon® connectors on both the front and rear panel provide the interface with...

Fiber Connector Panel Options VPL Panels—These 1U panels allow mounting of various tactical & non-tactical fiber optic connectors, as well as many other types of connectors. See part numbering key on pg. 7 Flush-Mount Wall Box Option VBZ-1832— The VBZ-1832 is an optional flush mount wall box version of the VIS-1832.The VBZ-1832 consists of a steel back box with adjustable mounting brackets. The VIS-1832 is mounted on a panel that is fit to the back box. The VBZ-1832 back box contains a single gang AC junction box with knock outs for connecting conduit for the AC run. There are also knock...

Ordering Information These part numbering keys allow specification and ordering of the correct part numbers. Part numbers vary depending on the type of optics, whether the device has “splits” or not, and the type of fiber optic or other connectors needed. Hole Position Optical Connector LC O2 = Neutrik OpticalCon Duo O4 = Neutrik OpticalCon Quad Optical Connector LC O2 = Neutrik OpticalCon Duo O4 = Neutrik OpticalCon Quad Fiber Type M = 62.5/125 m Multimode (1310) E = 50/125 m Multimode (1310) W= 62.5/125 m Multimode (850) S = 9/125 m Singlemode (1310) Fiber Type M = 62.5/125 m Multimode...

Made in the USA by Fiberplex Technologies LLC. • www.fiberplex.com • 301.604.0100 • sales@fiberplex.com