LM - ENDURLITE
LM - ENDURLITE
- Positive Plates: Tubular design with special lead-alloy to reduce water loss.
- Negative Plates: Pasted grid type.
- Electrolyte: High purity sulfuric acid with specific gravity of 1.24 at 20°C.
- Separators: Made from high-quality microporous material.
- Containers: Transparent, impact, and acid-resistant plastic (SAN).
- Safety Vents: Flame retardant ceramic plugs to prevent sparks.
- Terminals: Female threaded terminal (M10) for low resistance connections.
- Reliable and long-lasting.
- Low maintenance requirements.
- Excellent for cycling applications.
- Nominal Voltage: 2 V per cell.
- Float Voltage: 2.23 V/cell at 20°C.
- Boost Recharge: 2.4 V/cell.
- Self Discharge: Less than 2% per month at 20°C.
Catalog excerpts
Standby Products LM series FIAMM’s LM battery range can be used in standby mode or for duties requiring repeated charging and discharging operations (cycling applications). The LM battery range is specially designed for diffi cult environments and special applications such as solar and long discharge rates. Its tubular positive plates, a high reliability post seal and fully insulated connections among cells guarantee a long life even in the worst operating conditions. FIAMM has a program of continuous improvement investing in manufacturing processes, equipment and technology. FIAMM’s Standby Battery manufacture is in compliance with ISO 9001 and ISO 14001 quality assurance. Our continuous investment in battery technology is refl ected by means of premium products that are of the highest quality and reliability. FIAMM’s LM tubular vented lead acid batteries are the ideal energy source for many different standby applications. Technical Features Positive tubular plates: with a special lead-alloy for reduction in water loss and fi lling intervals Negative plates: are of pasted grid type Electrolyte: high purity sulphuric acid solution with a specifi c gravity of 1.24 (+/- 0.01) at 20°C Separators: are made of high quality micro porous material Containers: are constructed with transparent, impact and acid resistant plastic (SAN) material Safety Vents: cells incorporate fl ame retardant ceramic plugs that fi lter out any drops of electrolyte from the escaping gases preventing any errant spark or fl ame from entering the battery Terminals: female threaded terminal (M10) ensures perfect contact and a low resistance with the fl exible cable connectors Post seals: high integrity post seal design to prevent electrolyte leakage and terminal corrosion Connectors: flexible, fully insulated cable connectors screwed to the terminal with an insulated screw having a probe hole on the top for electric measurement Applicable Standards DIN 40736 part 1 IEC 60896 part11 Product Features Reliable Long life Low maintenance Excellent for cycling applications
Open the catalog to page 1All FIAMM catalogs and technical brochures
FAT4 Pages
general product6 Pages
ECOFORCE16 Pages
FIAMM SoNick. The greenergy2 Pages
SP - ENERLITE2 Pages
PMF - ENDURLITE2 Pages
FGC - Cyclic use range2 Pages
SGL-SGH - ENDURLITE2 Pages
SD-SDH - ENDURLITE2 Pages
FLB - HIGHLITE2 Pages
FGH - High-rate discharge range2 Pages
FG - Conventional Range2 Pages
UMTB - MONOLITE2 Pages
SMG - ENDURLITE2 Pages
SLA - MONOLITE2 Pages
FGHL - High-rate long life range2 Pages
Titanium Batteries6 Pages