FAT
4Pages

Applications and Key Benefits 12V AGM front terminal blocs - 30Ah to 180Ah nominal capacity Ideal for: - Telecom outdoor cabinets for wireline and wireless application - Broadband, microwave repeater and fiber optic regeneration sites - Extended backup solutions in utility switchgear and industrial applications Up to 12 year design life while in float operation in temperature controlled environments Excellent low rate discharge 1 to 10 hours Front terminal design for reduced headspace, higher energy density and compact battery layout Front terminal access reduces installation time and simplifies maintenance Will fit into 19 or 23 inch power racks / cabinets AGM recombination technology minimizes gassing Remote venting kits available for select FAT models Non-spillable No water additions required Non-hazardous for air/sea/rail/ road transportation 100% Recyclable Telcordia (Bellcore) SR-4228 Telcordia (Bellcore) TR-NWT-001200 Telcordia (Bellcore) TR-NWT-000909 UL Recognized UL 94 Class V-0 - flame retardant IEC 60896 Part 21 - VRLA methods of testing IEC 60896 Part 22 - VRLA requirements Eurobat “Long Life” - 12 years and longer BS 6290 Part 4 - specifications for VRLA classification BS 6334 method FV0 - flame retardant FIAMM Manufacturing - ISO 9001 Quality Management System - ISO 14001 Environmental Management System - Technical Features - Plates: extra thick plates with grids cast from high quality lead-tin-calcium alloy to ensure long reliable life and low gas emission - Separators: microporous absorbed glass mat (AGM) facilitates recombination and immobilizes the electrolyte - Container and Cover: made from thick walled flame retardant ABS plastic and designed for unsurpassed mechanical strength. The case and cover has an LOI greater than 28% and meets the flame retardant standards of UL 94 V-O. Thermally welded case to cover sealing eliminates leaks. - Flame Arrestors / Safety Valves: designed to open at 5 PSI and close at 3 PSI, the vent allows excess gas to escape when overcharging. - Terminals: threaded terminal posts with brass inserts provide high conductivity, retain required torque values and allow for easy installation. - Post Seals: The high integrity post seal design prevents electrolyte leakage over a wide temperature range - Internal Connections: heavy duty internal straps and through-the-partition cell connections minimize internal resistance and increase energy density - Terminal Covers: removable fully insulated covers designed with probe holes for safe and easy voltage measurement - Handles: to facilitate ease of handling, installation and removal of the batteries - Remote venting system available for applications which require gassing to be vented externally - Shelf life: < 2% self-discharge per month at 77°F allows 6 months shelf life before boosting is required

FAT FIAMM FAT range CAPACITY (Ah) TERMINAL TYPE* This Document and the confidential information it contains shall be distributed, routed or made available solely with written permission of FIAMM *optional L-brackets for front access (M6 on vertical side) Electrical Characteristics Torque Settings FLOAT VOLTAGE CHARGE AT 77°F: 2.26 Vpc TEMPERATURE COMPENSATION: -1.38 mV/°F Removable Terminal Covers FIAMM Energy LLC 1 FIAMM Way Waynesboro, GA 30830 www.fiamm.com email:info.standby.america@fiamm.com FIAMM reserves the right to change or revise without notice any information or detail given in...

FAT Constant Current Discharge Rates Amperes to 1.67 Vpc at 77°F (25°C) Constant Current Discharge Rates Amperes to 1.75 Vpc at 77°F (25°C) Constant Current Discharge Rates Amperes to 1,80 Vpc at 77°F (25°C) FIAMM Technologies LLC reserves the right to change or revise without notice any information or detail given in this publication FIAMM Energy LLC, One FIAMM Way, Waynesboro, GA 30830 Tel. 888-77-FIAMM (888-773-4266)

FAT Constant Power Discharge Watt per cell to 1,67 Vpc at 77°F (25°C) Constant Power Discharge Watt per cell to 1.75 Vpc at 77°F (25°C) 12 FAT 30 This Document and the confidential information it contains shall be distributed, routed or made available solely with written permission of FIAMM Constant Power Discharge Watt per cell to 1.80 Vpc at 77°F (25°C)