Catalogs >
FIAM >
Manual screwdrivers with DC driven nutrunner motors

Manual screwdrivers with DC driven nutrunner motors
8Pages

Catalog excerpts

Manual screwdrivers with DC driven nutrunner motors - 1

Manual screwdrivers with DC driven nutrunner motors • with DIRECT CONTROL (torque/angle control) • with INDIRECT CONTROL (current control)

Open the catalog to page 1

Manual screwdrivers with DC driven nutrunner motors - 2

Handheld tightening solutions to guarantee high quality assembled product. Multifunction Panel • Programs selection (4 or 8 depending on which TCS-B E model it is paired with) • Managing untightening operations • Connections with pallet lock/release/led signal tower/Socket Program Selector/ Enable/On Off) • 5 indicator LEDs: OK, NOK, RUN, OUT1, OUT2 2 memory statuses • Bracket for fastening to the cartesian arm An ideal solution for all industrial fields, from automotive to aerospace, from household appliances to electromechanical engineering, delivering numerous benefits throughout the...

Open the catalog to page 2

Manual screwdrivers with DC driven nutrunner motors - 3

Cables Kit • ables kit 4,5 mt-long to C connect the motor to the multifunction panel and TCS-B E unit • ll cables are shielded A • hey are supplied within T a sheath containing the cables with the aim to reduce dimensions and optimizing workbench layout BC cartesian arm • o be positioned on the workbench T • It supports the screwdriver, helps maintaining tool orthogonal position • Maximum ergonomics of the workplace: no effort and no torque reaction on the operator's wrist Brushless electronic screwdriver • 10 models up to 35 Nm • Hung to a cartesian arm • Equipped with straight grip with...

Open the catalog to page 3

Manual screwdrivers with DC driven nutrunner motors - 4

Controller and feeding unit TCS-B E: the intelligent simplicity TCS-B E (Tightening Control System - Basic - Evolution) are innovative and compact units that include electronic feeding to the motors, programming and control of each stage of tightening cycle. They control both current control and torque/angle nutrunner motors. 5 strategies: it is possible to choose between screw drive-engagement, torque, torque/angle, angle/torque, loosening. 5 programmable modalities, to guarantee reliability and working speed. Optical outcomes visualization for an immediate understanding through OK, NOK,...

Open the catalog to page 4

Manual screwdrivers with DC driven nutrunner motors - 5

TOUCH PANEL CONTROLLER AND FEEDING UNIT PLC LIGHT COLUMN WITH ALARM SOCKET PROGRAM SELECTOR CABLE EXTERNAL STORAGE KIT MOTORS

Open the catalog to page 5

Manual screwdrivers with DC driven nutrunner motors - 6

Screwdrivers with INDIRECT control 15 = Power of the screwdriver/10 • CB = Brushless electronic screwdriver • 05 = Maximum torque in Nm • C = Indirect control (current control) • L = Lever start Screwdrivers with DIRECT control 15 = Power of the screwdriver/10 • CB = Brushless electronic screwdriver • 05 = Maximum torque in Nm • A = Torque/angle control • L = Lever start U Reversibility: All models are suitable for tightening and untightening operation | / Lever start * Models available upon request Standard equipment • Noise level has been measured in accordance with ISO 3744 and ISO 15744...

Open the catalog to page 6

Manual screwdrivers with DC driven nutrunner motors - 7

fiam. fiam Model

Open the catalog to page 7

Manual screwdrivers with DC driven nutrunner motors - 8

How to order a screwdriver powered by brushless electronic motor Complete the following form and send it by fax +39 0444 385002 or by e-mail orders@fiamgroup.com. For information about the following form or other technical information, contact FiamTechnical Consultancy Service. CHOOSINGTHE STANDARD EQUIPMENT CHOOSINGTHE ACCESSORIES AVAILABLE ON REQUEST Type of screwdriver Addition of 4 more programs for TCS-B15/25 E 15CB05CL 15CB10CL 15CB20CL 15CB05AL 15CB10AL 15CB20AL 25CB20CL 25CB35CL 25CB20AL 25CB35AL cod. 111618140 cod. 111618141 cod. 111618142 cod. 111618150 cod. 111618151 cod....

Open the catalog to page 8