Automatic system for fastening of M5x4 grubs using pick and place

Product catalog summary

Introduction
Fiam has developed an automated system for the fastening of M5x4 grubs, specifically designed for use in the assembly of brake pump pistons on bikes and motorbikes. This system significantly enhances the speed and efficiency of the manufacturing process by automating tasks previously done manually.

System Components

Optical Sensor: Monitors the loading level of the linear guide to ensure efficient feeding of grubs.
Customized Bowl Feeder: Tailored to accommodate the specific size and shape of the grubs.
Customized Linear Guide: Designed to effectively feed the grubs into the system.
Fastening Nutrunner Motor: Features an automatic shut-off clutch and operates on a two-stroke fastening slide, which can be integrated into existing assembly lines.

Grub Automatic Picking Station
The system includes a station where grubs are automatically picked. An optical sensor detects the presence of a grub, which is then separated and pushed into the motor holding nosepiece by a pneumatic piston.

Environmental and Quality Certifications
The system is developed with environmental considerations in mind, as indicated by the use of recycled paper for documentation. Fiam holds both Quality Management and Environmental Management System Certificates.

Contact Information
Fiam Utensili Pneumatici Spa, Viale Crispi 123, 36100 Vicenza, Italy. Tel: +39.0444.385000, Email: [email protected]. Fiam France s.a.s.u., ZI Champ Dolin, 3 allée du Lazio, Bâtiment C, 69800 Saint Priest, France. Tel: +33.4.78700150, Email: [email protected].

Conclusion
This innovative solution by Fiam offers a competitive advantage by significantly increasing the speed of the manufacturing process, eliminating the need for manual handling of grubs.

Catalog excerpts

Automatic system for fastening of M5x4 grubs using pick and place-1

Tightening automation Automatic system for fastening of M5x4 grubs using pick & place grubs sorting Fiam designed and manufactured a machine to feed automatically and fasten small size grubs. Inner grub locking brake pump piston on bikes and motorbikes. Scope of solution: Bowl feeder customized according to the grub Linear guide customized in order to feed the grubs Optical sensor to control loading level of linear guide

Open the catalog to page 1

Automatic system for fastening of M5x4 grubs using pick and place-2

Grub automatic picking station Zoom on grub picking point Fastening nutrunner motor with automatic shut-off clutch built-in on a two strokes fastening slide. The customer will in turn install the slide on a positioning device or robot which is part of an existing assembly line. A solution no competitor could provide which highly increased manufacturing process speed considering beforehand customer was handling grubs by hand. Fiam Utensili Pneumatici Spa Viale Crispi 123 36100 Vicenza - Italy Tel. +39.0444.385000 Fax +39.0444.385002 Fiam France s.a.s.u. ZI Champ Dolin, 3 allée du Lazio, Bâtiment...

Open the catalog to page 2