automation. Nuts Pick and Place: for fast and efficent assemblies.

When bench or line assembly requires the use of very small nuts, time is essential to increase production. The innovative systems for fastening with automatic nuts feed notably reduce the cycle-time and thus improve productivity. This is why: ^ They offer an easy and continuous supply of nuts to be tightened ^ For MANUAL use, they eliminate the phases of picking and placing the nut, making the operator's work easier, as they allow the nut to be picked up directly with the screwdriver without using the hands, while for AUTOMATIC use, they speed up tightening operations with effective and always...

The 'pick and place' systems guarantee greater speed in the work cycles with concrete reduction of the production costs. • The manual phases (picking up the nut and positioning it) are eliminated with a reduction of the cycle times over 24% • Reduced fatigue for operator • Higher quality of the assembled products: no nut remains into the component A high capacity vibrating loader unit equipped with a transparent cover for a good view of the bowl It can be easily adjusted through a built-in electronic unit A pneumatic cylinder positioned into presenter pushes the nut upwards to insert it in the...

• Recommended working pressure: 6,3 bar • 1/4”gas air inlet • Mains supply: 220 V, 50 Hz • The code number must be used when ordering • Special socket for screwdriver to be ordered separately (see Accessories available upon request) HEXAGONAL NUTS Weight Minimum Maximum Hexagon height height kg mm mm mm Standard equipment (provided with the presenter) • Electronic unit for adjusting operating speed • Use and maintenance manual • Eco-friendly packaging Accessories available upon request • Special sockets for screwdrivers for hexagonal head nuts shown in the table. • Customised sockets SPECIAL...

N ED Tightening systems for Pick and Place for manual or automatic use The N ED “Nut EasyDriver” nut presenters can be used for both manual and automatic tightening systems and are designed to ensure extremely fast and smooth nut drafting for optimum operator convenience and comfort, resulting in improvements in cycle times and therefore productivity. The nut feed speed can also be adjusted thanks to the integrated electronic unit, a condition that is especially useful when using the presenter in automatic tightening stations. In fact, the innovative mechanical features make N ED presenters an...

NUT PICK UP AND RETAINING SOCKET The nut picking and retaining sockets, are designed with small radial encumbrance, which makes the system usable even in the tightest tightening points with restricted space and access. They pick up and retain the nut mechanically, thanks to a tweezer that holds the nut firmly internally, on the thread, during pick-up and translation steps, without risk of losing it on components. SOCKET GUIDE The socket guide (B) is always to be interposed between the nut picking and retaining socket (C) and the screwdriver or nutrunner motor (A). • in the manual version it prevents...

• Model for nuts M6 - M8 - M10The dimensions shown are approximate because the nut presenters are designed and manufactured by Fiam on the type of nut to be fed. The dimensions therefore are intended to be variable.

Socket Guide Air manual solution For -FT series eTensil Electric Manual Solution Automation Solution Air manual solution For -FT series Socket Guide Socket Guide eTensil Electric Manual Solution

REACTION ARMS Fiam telescopic and cartesian arms completely counteract the reaction on the operator's hand, the force required to support the tool and the vibrations to the hand-arm system. They make it possible to keep the wrist in a good position with the tool perpendicular to the work point, improving working accuracy and production process quality. They are entirely designed and produced by Fiam as are all the accessories and numerous devices to improve the ergonomics of the workplace and safeguard the health of the operators. Available in several versions: • Telescopic arms • Cartesian arms...

FASTENING SLIDES To obtain a fully automatic nut-tightening station, it is possible to install the necessary pneumatic or electric nutrunner motor on a fastening slide that can be easily integrated on production systems such as assembly lines, manipulators, electric cartesian axes, robots, collaborative robots and to obtain complete and autonomous tightening cycles with a simple external start (from PLC, from dual control, from push-button or pedal etc.). Fiam fastening slides, entirely designed and manufactured by Fiam have compact dimensions and light weights and are equipped with: Shielded...