Air screwdrivers and nutrunners without clutch CD...PRSF and AS, AN, AY • Torque range: from 6 up to 110 Nm • Pistol models and angle models with flat angle head, 90° angle head, worm drive

Air screwdrivers and nutrunners without clutch Practical and versatile in use for any requirement Fiam screwdrivers/nutrunners without clutch are simple and practical tightening solutions: the air motor is directly connected by means of adapters to the accessory (bit, socket, etc.) working on the screw. The torque applied can be adjusted by regulating the air feed pressure. These screwdrivers/nutrunners don’t generate vibrations, guaranteeing the operator’s comfort. They are very versatile solutions as they can tighten screws with different diameters on different joints. Pistol grip models are...

Various solutions for any requirement They are used in many applications for different products and screws. They are very versatile solutions as they can be used on different joints. With 380 Watt in power, they tighten screws up to 16 Nm, particularly self-threading, self-drilling and wood screws of different lengths and dimensions are used. With 260 Watt in power, they tighten every type of component from 11 up to 70 Nm; they can be used with metric screws up to M8 - M10. With 400 Watt in power, they tighten screws from 23 up to 30 Nm; they can be used with metric screws up to M10. Equipped...

Don’t be satisfied with the maximum Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs Considerable increase of the efficiency of the tightening cycle thanks to innovative systems Made in Fiam: designed and manufactured by Fiam, they guarantee the correct functioning in every working condition, on every type of joint and with every type of threaded element Angle models: They are indispensable when working in areas of limited space or restricted access, such as up against walls, structural metal sections...

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard The low weight and the ergonomic grips make easier to hold the tool, improving the handling and operator’s comfort Thanks to torque transmission system, that can be easily controlled by adjusting the pressure of the compressed air supply, they guarantee very low vibration levels The built-in silencing system allows to considerably reduce the noise level All models...

Legend U Reversibility: All models are suitable for tightening and untightening oper ■ The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. ■ The tightening torque values have been measured in accordance with ISO 5393 standard. ■ Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. ■ Vibrations level has been measured in accordance with ISO 28927-2. ■ Accessory drive: 1/4" 6,35 mm female hexagonal drive (ISO 1173). ■ The code number must be used when ordering. Torque values refer to analysis of laboratory performing...

FLAT HEAD FLAT HEAD FLAT HEAD WORM DRIVE WORM DRIVE WORM DRIVE WORM DRIVE Legend eversibility: All models are suitable for R tightening and untightening operation * Using either the bottom hexagonal drive (right-hand rotation) or top hexagonal drive (left-hand rotation) • The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. • The tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. • Vibrations level has been measured in accordance...

Accessories available upon request Keyed chuck Air flow governor with scaled control Other accessories • Suitable to use CD...PRSF air screwdrivers as a drill (code 650141008; E DIN 3126 standard). • Suitable to obtain the required torque value by adjusting the air feed flow (code 697451000). Less air flow = less torque. • Bits, sockets and other accessories (see catalogue nr. 78) • Couplings, hoses, filters, governors and other compressed air system accessories • Auxiliary grip, balancing arms, cartesian arms and magnesium telescopic arms • Filter, pressure regulator, oil fog lubricator. Suitable...