Catalogs >
FIAM >
Air screwdrivers CY, CG

Air screwdrivers CY, CG
4Pages

Catalog excerpts

• Torque range: from 7 to 40 Nm • Automatic air shut-off • Straight and pistol models

Be demanding Tightening at high torques and speeds using CG shut-off clutch models up to 40 Nm. A careful design guarantees long lifetime and reliability of the components which results in high productive process, less maintenance and repair costs The torque control system with Highly performing solutions for any mechanical field where tightenings at high torques achieving good torque repeatability with a good weight/performance ratio and high speed is necessary. The straight models CG complete the range increasing torque achieved, up to 40 Nm. automatic and immediate air shut-off...

Open the catalog to page 2

Naturally innovative Don't be satisfied Perfection is with the maximum in your hands Considerable increase of the efficiency of the tightening cycle thanks to innovative systems Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard These air screwdrivers are employed where good repeatability of the tightening torque is needed The torque control system permits a considerable reduction of the quality control times The silencer on the air exhaust guides the output...

Open the catalog to page 3

Screwdrivers with pneumatic pick-up signal CY9RAM-WP-2CS ' CG models are available upon request with double signal ports for error proofing. • The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. • The tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. * Additional factor: 3 dBA spread in method and production (ISO 15744). • Vibrations level have been measured in accordance with 28927-2. • Accessory drive: 1/4" 6,35 mm female...

Open the catalog to page 4