*mydirectindustry

Catalogs
FIAM
Air marking pen

Air marking pen

Product catalog summary

Specifications:
The air marking pen operates at a recommended pressure of 6.3 bar, as per ISO 2787. Noise levels are measured according to ISO 3744 and ISO 15744, while vibration levels follow ISO 8662-1 standards. The pen is supplied with a tungsten carbide point and a 3-meter hose connector, and it comes in eco-friendly packaging with a use and maintenance manual. Different point sizes are available: fine, medium, and thick.

Performance and Usage:
The PM1 air marking pen can mark on various materials including hard steel, metals, glass, stone, ceramics, and plastics. It is suitable for deburring and personalizing tools. The pen features a reciprocating movement with 500-600 strokes per second, offering rapid and precise marking akin to writing with a ballpoint pen. The tungsten carbide point is treated for durability.

Operational Details:
The pen starts using a rotary valve and has a vibration level of less than 2.5 m/sec² and a noise level below 70 dBA. It consumes 0.45 l/s of compressed air and weighs 0.16 kg (0.35 lb). The dimensions are 17x162 mm, and it has a 1/4" gas air inlet.

Additional Information:
Fiam provides technical assistance for further details. The company emphasizes that laboratory-measured noise and vibration levels may not reflect actual workplace conditions, which depend on various factors including operator methods and exposure time. Fiam disclaims responsibility for risk evaluations based on these values.

Contact Information:
Fiam Utensili Pneumatici Spa is located in Vicenza, Italy, with branches in France and Spain. Contact details are provided for further inquiries.

Catalog excerpts

fiam PEOPLE AND SOLUTIONS

Open the catalog to page 1

With PM1 air marking pen it is possible to mark on hard steel, ferrous and non-ferrous metal, glass, stone, ceramics and plastics etc. It may be used for deburring and for personalizing the workshop tools. This marking pen model has a reciprocating movement with a 500 - 600 strokes/sec. 3 times more than other pens. The high frequency of strokes allows a rapid and a very precise marking: it is like writing on paper with a common ball point pen. The hi-tech treatment on the tungsten carbide point ensures a long life. ■ Starting by means of a rotary valve • The figures shown are measured at a pressure...

Open the catalog to page 2

All FIAM catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list