Air drills
24Pages

{{requestButtons}}

Catalog excerpts

Air drills - 1

Safe and versatile. v Practical and easy to handle. Effective and powerful. To guarantee the maximum Air drills • Straight, pistol and angle models • Drilling capacity: from 1 to 20 mm 0

Open the catalog to page 1
Air drills - 2

Fiam air drills: drilling on any kind of material with handiness and efficacy The main technological parameters in drilling operations are the cutting speed and the force with which the drill is moved forwards, both of which are in their turn connected with the type of material being drilled, the diameter of the hole and the idle speed of the drill. Fiam air drills offer considerable advantages, combining high performance with an excellent power to weight ratio and design features that make them particularly easy-to-handle in every production field. The range includes various models with...

Open the catalog to page 2
Air drills - 3

Choosing the right air drill To choose the right air drill, a range of different interdependent factors needs to be considered, among which we have the diameter of the hole and the cutting speed suitable for the material to be drilled. The table helps one choose the right Fiam drill for the type of material being drilled, the corresponding cutting speed and the diameter of the helical bit. Material Compound steel Non-compound stainless steel steel. Cast iron, mild steel. Aluminium, bronze, brass, hard plastics. Wood and wood products composite mat. soft plastic Cutting speed (m/min) 5÷13...

Open the catalog to page 3
Air drills - 4

Don’t be satisfied with the maximum Long lifetime of the components thanks to careful design and quality of the production process which results in less maintenance and repair costs Great use effectiveness thanks to innovative design systems The internal gears guarantee constant performance and long lifetime of the tool Fiam drills guarantee a great versatility of use: they can be used on any kind of material and in every work situation making them the perfect answer FO series is particularly effective for heavy-duty drilling and boring operations in which the drill needs to be moved...

Open the catalog to page 4
Air drills - 5

Naturally innovative Perfection is in your hands Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard The grip design and use of special light alloys make these tools lighter and more handy They guarantee maximum handiness, thanks to the good power/weight ratio and the extremely compact dimensions, reducing operator's fatigue They are started using the related lever (straight and angle models) or push button (pistol models) in comfortable position for operator...

Open the catalog to page 5
Air drills - 6

Straight air drills FZ, FS, FY IDLE SPEED: from 500 to 20.000 r.p.m. Straight air drills DRILLING CAPACITY: from 1 to 10 mm Ø TYPE OF DRILL: - with self-locking chuck - with keyed chuck - without chuck C = with keyed chuck without chuck C= with keyed chuck

Open the catalog to page 6
Air drills - 7

STARTING SYSTEM: lever APPLICATION FIELD: they are mainly used in vertical drilling operations on any kind of material C = with keyed chuck A= with self-locking chuck C= with keyed chuck

Open the catalog to page 7
Air drills - 8

Self-locking chuck Keyed chuck Without chuck Keyed chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck FZ, FS, FY...A = models with self-locking chuck • FZ, FS, FY...C = models with keyed chuck • FZ, FS, FY.. = For the right choice, see...

Open the catalog to page 8
Air drills - 9

To choose the right air drill, it is necessary to check the drilling capacity in the chart on page 3. The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. Noise level has been measured in accordance with ISO 3744 and ISO 15744. The code number must be used when ordering. The data given in the table are indicative and can be changed without prior notice. The values indicated for noise levels were obtained in the laboratory, performing tests that comply with the standards stated, but alone are not sufficient for calculating risks. Values...

Open the catalog to page 9
Air drills - 10

Pistol air drills FSE, FDE, FY FO , IDLE SPEED: from 170 to 20.000 r.p.m. Pistol air drills A= with self-locking chuck Bit holder female morse taper bore DRILLING CAPACITY: from 1 to 13 mm Ø TYPE OF DRILL: - with self-locking chuck - with keyed chuck - without chuck

Open the catalog to page 10
Air drills - 11

STARTING SYSTEM: button APPLICATION FIELD: they are suitable for a lot of drilling operations on every type of material and in every industrial field. FO series is particularly effective for heavy-duty drilling and boring operations in which the drill needs to be moved forward with considerable force. A= with self-locking chuck A= with self-locking chuck C= with keyed chuck

Open the catalog to page 11
Air drills - 13

Keyed chuck Without chuck Self-locking chuck Without chuck Type Self-locking chuck Keyed chuck Keyed chuckchuck Self-locking Without chuck Keyed chuck Self-locking chuck Without chuck Keyed chuckchuck Self-locking Without chuck Keyed chuck Self-locking chuck Without chuck Keyed chuckchuck Self-locking Without chuck Keyed chuck Self-locking chuck Without chuck Keyed chuckchuck Self-locking Without chuck Keyed chuck Without chuck Without chuck Self-locking chuck Without chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck FSE10PC Keyed chuck 1÷10 9 1000 FSE, FDE, FY, ...PA...

Open the catalog to page 13
Air drills - 14

Angle air drills FZ, FS, F Y IDLE SPEED: from 500 to 4.500 r.p.m. Angle air drills DRILLING CAPACITY: from 1 to 10 mm Ø TYPE OF DRILL: - with self-locking chuck - with keyed chuck - without chuck Models with 30° (FZ series) and 90° angle heads 90° angle drills (FS series) are also available in the version which permits the use of collet instead of the normal keyed chuck C= with keyed chuck P = with collet chuck P = with collet chuck

Open the catalog to page 14
Air drills - 15

STARTING SYSTEM: APPLICATION lever FIELD: they are necessary when one needs to drill in tight spaces where access is difficult, such as up against walls, close to metal sections and profiles beams FY8/90C C= with keyed chuck FZ31/90P P = with collet chuck Fs17/90p p = with collet chuck

Open the catalog to page 15

All FIAM catalogs and technical brochures

  1. Air motors

    50 Pages

  2. Drills-30F

    10 Pages

  3. Air drills

    24 Pages

  4. Air tappers

    16 Pages

Archived catalogs

  1. Air tappers

    16 Pages

  2. Reaction arms

    20 Pages