Air angle nutrunners


Catalog excerpts

Air angle nutrunners - 1

Reliability and accuracy: real innovation knows no obstacles. Air angle nutrunners • with 90° angle head • with 30° angle head • with in line tubenut open head • Torque range: from 0,8 to 60 Nm • Automatic

Open the catalog to page 1
Air angle nutrunners - 2

Tightening in presence of limited space and where access is difficult. Also with high torques. Particularly suitable for motorvehicle industry and household appliances, angle nutrunners are indispensable when space is limited and where access is difficult, such as up against walls, close to metal sections and profiled beams, etc. Main features are: • robust angle heads to guarantee long lifetime • high torque accuracy • great attention to ergonomics Real innovation knows no obstac

Open the catalog to page 2
Air angle nutrunners - 4

With the AF nutrunners all points that need tightening are within easy reach These air nutrunners with a flat head drive are the most effective tool for solving all assembly situations where it’s difficult to reach the point to tighten and where objects would get in the way of ordinary angle nutrunners. More specifically, the AF air angle nutrunners are extremely useful where there are pressurised circuits, that is to say components with pipes containing fluids fitted with nuts that need tightening (as could be gas ramps in hobs, refrigerator compressor pipes, car braking system pipes,...

Open the catalog to page 4
Air angle nutrunners - 5

Robust angle heads to guarantee reliability and long lifetime. Radial opening ideal to reach the nut.

Open the catalog to page 5
Air angle nutrunners - 6

Don’t be satisfied with the maximum Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs Considerable increase of the efficiency of the tightening cycle thanks to innovative systems The torque control system with instant automatic air shutoff improves the quality of the tightening process, and consequently that of the finished product The torque control system reduces the need to perform quality controls at the end of assembly High performance motor: optimising performance even when supply...

Open the catalog to page 6
Air angle nutrunners - 7

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard All nutrunners, except for A...R models, have a rotating cursor for the adjustment of the clutch, practical, easy and safe Effective built-in silencing system: these nutrunners are extremely noiseless and are equipped with a controlled spread of the exhaust air The long ergonomic start lever permits a more comfortable and easy grip to guarantee the operator’s...

Open the catalog to page 7
Air angle nutrunners - 8

FLATCLOSE HEAD FLATCLOSE HEAD Legend Reversibility: all models are suitable for tightening and untightening operations The A10RYA model is reversed by using either the bottom hexagonal drive (right-hand rotation) or top hexagonal drive lefthand rotation). Type Type • The figures shown are measured at a pressure of 6,3 bar (ISO 2787) the recommended operating pressure. • Tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. * Additional factor: 3 dBA spread in method and...

Open the catalog to page 8
Air angle nutrunners - 9

upon request upon request upon request upon request upon request FLAT FLAT Type Type Tightening torque on soft joint ANGLE AIR NUTRUNNER WITH IN LINE TUBENUT OPEN HEAD upon request upon request How to choose 40A...AF... models 40 = Nutrunner power (400 watt) • A = Angle nutrunner • 17 = Maximum torque expressed • A = Air shut-off • F = Flat (flat head drive) • 12 = Hexagonal drive used • B/T = Type of end gear (Blind or Through - E.g.: B = Models with Trough end gear (T version instead of B) (i.e. 40A17AF12B ➝ 40A17AF12T) • 7,5 = Extended hexagon size, the size can be from 7.5 mm to “n”,...

Open the catalog to page 9
Air angle nutrunners - 10

standard CONFIGURATIONS END GEAR FOR HEX FROM 8 TO 15 mm • Blind hexagon • Through hexagon for end gears until 14 mm • Reinforced hexagon for end gears from 15 mm EXTENDED END GEAR FOR HEX FROM 16 TO 22 mm • Blind hexagon EXTENDED HEXAGON SIZE * Size (mm) from 7 mm .5 to “n” , depending on the need • Through hexagon 9 mm: maximum pipe diameter the head can hold. Different diameters upon request. The size of the extended hexagon (*), can be: - 0 to 30 mm for use of hexagons up to 15 mm max - 7 to 30 mm for use of hexagons greater than 15 mm .5 CONFIGURATIONS AVAILABLE UPON REQUEST END GEAR...

Open the catalog to page 10
Air angle nutrunners - 11

Other Technical features for all models Other technical features Models Recommended hose bore Standard equipment (supplied with the tool) • Clutch adjustment key • Grease gun (only for 40A…AF… models) • Specific grease (30 gr. tube) code 699051038 (only for 40A…AF… models) • Hanging ring • Use and maintenance manual • Eco-friendly packaging Accessories available on request • Bits, sockets, manual and magnetic adaptors for inserts, exhaust air conveyors, balancers and other accessories. See the “Fiam Accessories”catalogues n. 77 and 78. • Swivelling bail ring for models AD, AG: practical...

Open the catalog to page 11
Air angle nutrunners - 12

Accessories available upon request CARTESIAN ARMS BC AND BCA The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in 2 versions: • Cartesian Arms • Articulated Cartesian Arms Articulated Cartesian Arm BCA25 Articulated Cartesian Arm BCA40...

Open the catalog to page 12
Air angle nutrunners - 13

AD.../AG... MODELS Overall dimensions

Open the catalog to page 13
Air angle nutrunners - 14

Standard head: maximum pipe diameter the head can hold is 9 mm (for different diameters please contact the Fiam Technical Consultancy Service)

Open the catalog to page 14
Air angle nutrunners - 15

Air angle nutrunners + screws counting 0% error, 100% accuracy. Did you lose any screws? The ‘screws count’ function will help you: therefore in case of high production rate, you won’t risk any omission. Moreover, the feed-back signal and the end one to pass to next piece accelerate the production cycles and ensure control on the assembled products. So dead times will decrease and quality will increase. The solution includes: • Lever AIR ANGLE NUTRUNNERS equipped with pneumatic pick-up signal (ported) • COMPUTERIZED MONITORING UNIT TOM (Tightening Operation Monitor): it allows the...

Open the catalog to page 15

All FIAM catalogs and technical brochures

  1. Air motors

    50 Pages

  2. Drills-30F

    10 Pages

  3. Air drills

    24 Pages

  4. Air tappers

    16 Pages

Archived catalogs

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Reaction arms

    20 Pages