Reliability and accuracy: real innovation knows no obstacles. Air angle nutrunners • with 90° angle head • with 30° angle head • with in line tubenut open head • Torque range: from 0,8 to 60 Nm • Automatic

Particularly suitable for motorvehicle industry and household appliances, angle nutrunners are indispensable when space is limited and where access is difficult, such as up against walls, close to metal sections and profiled beams, etc. • robust angle heads to guarantee long lifetime • high torque accuracy • great attention to ergonomics 2 Real innovation knows no obstacles

With the AF nutrunners all points that need tightening are within easy reach These air nutrunners with a flat head drive are the most effective tool for solving all assembly situations where it’s difficult to reach the point to tighten and where objects would get in the way of ordinary angle nutrunners. More specifically, the AF air angle nutrunners are extremely useful where there are pressurised circuits, that is to say components with pipes containing fluids fitted with nuts that need tightening (as could be gas ramps in hobs, refrigerator compressor pipes, car braking system pipes, boiler...

Robust angle heads to guarantee reliability and long lifetime. Radial opening ideal to reach the nut.

Don’t be satisfied with the maximum Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs Considerable increase of the efficiency of the tightening cycle thanks to innovative systems The torque control system with instant automatic air shutoff improves the quality of the tightening process, and consequently that of the finished product The torque control system reduces the need to perform quality controls at the end of assembly High performance motor: optimising performance even when supply pressures...

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard All nutrunners, except for A...R models, have a rotating cursor for the adjustment of the clutch, practical, easy and safe Effective built-in silencing system: these nutrunners are extremely noiseless and are equipped with a controlled spread of the exhaust air The long ergonomic start lever permits a more comfortable and easy grip to guarantee the operator’s comfort...

• The figures shown are measured at a pressure of 6,3 bar (ISO 2787) the recommended operating pressure. • Tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. • Additional factor: 3 dBA spread in method and production (ISO 15744). • Vibrations level have been measured in accordance with ISO 28927 - 2 standars. • Accessory drive: male square drive (ISO 1174). • The code number must be used when ordering. Torque values refer to analysis of laboratory performing tests that comply with...

Tightening ' torque on soft joint How to choose 40A...AF... models 40 = Nutrunner power (400 watt) • A = Angle nutrunner • 17 = Maximum torque expressed • A = Air shut-off • F = Flat (flat head drive) • 12 = Hexagonal drive used • B/T = Type of end gear (Blind or Through - E.g.: B = Models with Trough end gear (T version instead of B) (i.e. 40A17AF12B ^ 40A17AF12T) • 7,5 = Extended hexagon size, the size can be from 7.5 mm to "n", depending on the need. Legend Reversibility: all models are suitable for tightening and untightening operations 40A...AF... models: reversing to direction of rotation...

STANDARD CONFIGURATIONS END GEAR FOR HEX FROM 8 TO 15 mm • Blind hexagon • Through hexagon for end gears until 14 mm • Reinforced hexagon for end gears from 15 mm EXTENDED END GEAR FOR HEX FROM 16 TO 22 mm • Blind hexagon EXTENDED HEXAGON SIZE * Size (mm) from 7.5 mm to “n”, depending on the need • Through hexagon 9 mm: maximum pipe diameter the head can hold. Different diameters upon request. The size of the extended hexagon (*), can be: - 0 to 30 mm for use of hexagons up to 15 mm max - 7.5 to 30 mm for use of hexagons greater than 15 mm CONFIGURATIONS AVAILABLE UPON REQUEST END GEAR WITH EXTENDED...

Accessories available upon request BT-TOP TELESCOPIC ARM WITH BRACKET FROM TOP To be installed on the top of the workbench, it offers an ergonomic layout for effortless work by sliding the tool along the vertical axis of the arm. Ideal for working in operational spaces with lateral encumbrances or to work on positioning jigs. Equipped with a NO SPIN anti-rotation device which prevents the arm from rotating on its axis, counteracting the reaction on the operator’s hand-arm system. Supplied with a tool clamp for use with air and electric tools, both straight and pistol grip. Upon request additional...

CARTESIAN ARMS BC AND BCA The Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in various versions: • Cartesian Arms • Articulated Cartesian Arms • Cartesian Arms and Articulated Cartesian Arms to be fixed to the surface or upper structure (TOP)...

Accessories available upon request ALL THE ARMS ARE AVAILABLE WITH A POSITION MONITORING DEVICE All Fiam Cartesian arms can be fitted with a position monitoring device and, combined with the TPM monitoring unit, help make tightening systems very suitable for “Poka-Yoke” processes, while increasing the efficiency and speed of the production cycle. The guided positioning system operates as follows: • It locates the screwdriver position at the various tightening points and stores them (up to 35 positions/program and up to 8 programs) • The screwdriver is enabled when it is at the first stored position...