ITALIAN AEROSPACE SOLUTIONS

“ Italy has a tradition of excellence that is unrivalled anywhere in the world. In countless fields. And this tradition can be seen even today in the ability to conceive, create and build solutions for manufacturing and industrial maintenance. Even at the most sophisticated end of the scale, namely for the aerospace industry. Choosing Italian solutions from Fiam means choosing reliability, design, no-nonsense construction, and concern for operators, their safety and their productivity. j j

• Air grinders and sanders page 14 • Air screwdrivers with automatic shutoff page 16 • Electric screwdrivers page 24 • Cordless screwdrivers page 32 • Pick-and-place tightening systems page 34 • Measuring and testing instruments page 35

STRAIGHT MODELS � Drill capacity 1 ÷ 10 mm in Ø � Free speed: 600 ÷ 22,000 rpm � Watt: 130 ÷ 400 Watt � Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Effective and with favourable power-to-weight ratio • Ideal for drilling on horizontal surfaces • Collet-type models for holding the accessory • Quiet and compact • Insulated non-slip grips • Lever start, even at low speeds to help with seating the bit (for FZ,FY models) The 30F models, specific for the aerospace sector, are equipped with motors and epicyclic reduction gears that ensure effective performance even in heavy...

Keyed chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck Self-locking chuck Keyed chuck Without chuck 30F, D, FZ, FY... = Models without chuck * Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT: 1: J 0 taper - 2: Threaded 3/8” x 24 UNF. - 3: Threaded 1/2” x...

PISTOL MODELS � Drill capacity 1÷13 mm in Ø � Free speed: 600 ÷ 22,000 rpm � Watt: 130 ÷ 400 Watt � Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Effective and with favourable power-to-weight ratio • Ideal for drilling on vertical surfaces • Collet-type models for holding the accessory • Quiet and compact • Insulated non-slip grips • Geometries designed to guide the bit accurately and safely to avoid harmful flexing of the wrist • The pistol grip is always the best option for holes greater than 6-8 mm in diameter because it is better suited to applying the right driving...

Accessories? You can find them here. 30F, FDE, FY, FO ... = Models without chuck Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT: 1: J 0 taper - 2: Threaded 3/8” x 24 UNF. - 3: Threaded 1/2” x 20 UNF.

ANGLE MODELS � Drill capacity 1÷ 13 mm in Ø � Free speed: 500 ÷ 4,500 rpm � Watt: 130 ÷ 400 Watt � Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Ideal for drilling in small, hard-to-reach spaces, such as against walls or near profiles and shaped sections • Rugged 30° and 90° angle drilling heads • Fast and with favourable power-to-weight ratio • Collet-type models for holding the accessory • Quiet and compact • Insulated non-slip grips The 30F models, specific for the aerospace sector, are equipped with motors and epicyclic reduction gears that ensure effective performance...

Accessories? You can find them here. 30F, FZ, FY...A = Self-locking chuck 30F, FZ, FY...C = Keyed chuck 30F, FZ, FY... = Models without chuck Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT:

MODULAR MODELS � Straight and pistol motors/drills � Free speed: 1,200÷6,200 rpm � Watt: 300 Watt � Quick change to get different configurations in a matter of seconds The 30F 300 Watt air drills are extremely versatile because the same motor/drill can be combined with different drilling heads so that the same tool can provide different operating configurations, such as those demanded in the aerospace industry. Moreover, their new-generation motors and epicyclic reduction gears ensure effective performance even in heavy working conditions, as well as with sub-optimal supply pressures. These fast...

MODULAR STRAIGHT DRILLS MODULAR PISTOL-GRIP DRILLS OUTPUT SHAFT: Threaded 3/8” x 24 UNF. COMPATIBLE DRILLING HEADS DRILLING HEAD COLLETS FOR MODULAR DRILLS STRAIGHT HEAD - 1/4 STRAIGHT HEAD - 9/32 CODE DIMENSIONS OUTPUT TYPE Accessories for 0 ergonomically sound workplaces?

STRAIGHT AND PISTOL MODELS • For tapping from 4 to 22 mm in diameter (on steel) • Free speed: from 140 to 1,000 rpm. return: from 470 to 1,700 rpm • Reversible models For quick and effortless tapping operations by hand with machine taps, even where high standards of quality are demanded, such as those demanded in manufacturing facilities within the aerospace industry. Designed to deliver ease of handling and versatility of use no matter what the job. • Automatic reverse device, automatically reversing rotation with increased return speed (lever operated on MAO models) so that the tap can be removed...

FREE SPEED PISTOL MODELS STRAIGHT MODELS • All feature quick-change chuck and automatic rotation reverse device MAS...,MAY..,MASE...P, MAY...P, MAO...P models with collet chuck MAS...B, MAY...B, MASE...PB, MAY...PB models with precision collet chuck For more information about the features of the range, refer to the online catalogue: Accessories? You can find them here. 13

• Turbine technology TURBINE MODELS: • Amazing power for any industry, even in the most extreme demanding conditions • Keep going for 24-hour shifts, 7 days a week For grinding, deburring, chamfering, grooving, removing material, sanding, cutting, polishing, roughing and lapping any material, you need tools that are durable, reliable and, above all, safe and designed to make the operators’ job easier. • Powerful: for work in different applications • Safe: no accidental starts • Rugged: low maintenance and continuous efficiency