Catalogs >
FIAM >
Accessories for ergonomic workplace 2021

Accessories for ergonomic workplace 2021
24Pages

Catalog excerpts

Accessories for ergonomic workplace 2021 - 1

Accessories for ergonomic workplace • Magnesium telescopic arms • Cartesian arms •Articulated cartesian arms •Assisted Cartesian arms • Positionning devices • Balancing arms - Balancers •Auxiliary grips

Open the catalog to page 1

Accessories for ergonomic workplace 2021 - 2

Accessories for ergonomic workplaces Nowadays, an ergonomic and rational work station is designed according to the most advanced ergonomic principles, which take account not just of physical ergonomics, but cognitive and organisational ergonomics as well. In fact, it is not enough just to provide operators with tools that prevent any physical fatigue to the hand-arm system, are not very noisy and keep working environments healthy by not polluting the air with oil condensates. Nor is it enough to arrange the components to be assembled comfortably, conveniently and correctly on the work...

Open the catalog to page 2

Accessories for ergonomic workplace 2021 - 3

Many factors have to be considered in order to design an ergonomic workplace, namely: Using last generation tools which eliminate the beginning operator’s risk factors. The tools must be chosen according to the type of joint, of screws, of operator’s position at workplace (sitting or standing). l Use of accessories that, according to their combination, can solve specific logistic and productive needs. Accessories need to be specified according to tool type, type and dimensions of workplace, type and dimensions of workpiece. Accessories also include screwdriver bits, which can promote...

Open the catalog to page 3

Accessories for ergonomic workplace 2021 - 4

BT-MG MAGNESIUM TELESCOPIC ARMS New range of telescopic arms in magnesium alloy, designed and produced by Fiam. Conform for use with any kind of tool (screwdrivers/nutrunners, drills, tappers) being extremely resistant to mechanical stress thus guaranteeing reliability and long life span, thanks to accurate manufacturing process and applied innovative materials. Designed with different telescoping extension elements (3 for all models and 2 for BT-MG 10...), they are conform for working areas according to various productive needs: from a minimum of 45,5 cm to a maximum of over 2 meters....

Open the catalog to page 4

Accessories for ergonomic workplace 2021 - 5

• Wide Operating Area • ide rotation W of the tool around its axis • They eliminate any counterblow to operator’s hands • They eliminate vibrations caused by the tool • Reduce the worker’s fatigue in handling the equipment • They assure a comfortable and immediate taking of the tool next to the point of work • Enable the operator to keep a good wrist position • They prevent musculoskeletal diseases caused by repeated mechanical stresses • Fiam BT-MG arms absorbe the reaction 30% more than the other arms o

Open the catalog to page 5

Accessories for ergonomic workplace 2021 - 6

Standard equipment (supplied with arm) • Universal clamp with 2 kits of screws with different lengths to install tools with different diameter from 26.5 up to 50 mm • Eco-friendly packaging • Use and maintenance manual Accessories available upon request • Tool holder accessory (1) for electric screwdrivers eTensil code 692079180. Manages 9 positions of rotations.

Open the catalog to page 6

Accessories for ergonomic workplace 2021 - 7

CARTESIAN ARMS The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in 2 versions: • Cartesian arms • Articulated Cartesian arms • Cartesian Arms and Articulated Cartesian Arms to be fixed to the surface or upper structure (TOP) • Assisted...

Open the catalog to page 7

Accessories for ergonomic workplace 2021 - 8

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) BCA-toP Cartesian Arm Sturdy vertical column Its increased diameter avoids any swings Upon request: adjustable vertical stroke limiters (clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool) Cartesian arm with TOP clamping, also available for BC Cartesian Arms. Ball recirculating runners Vertical and...

Open the catalog to page 8

Accessories for ergonomic workplace 2021 - 9

Lateral extension up to 760 mm The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimum space (R1 - R2).

Open the catalog to page 9

Accessories for ergonomic workplace 2021 - 10

Sturdy vertical column Its increased diameter avoids any swings Upon request: adjustable vertical stroke limiters (clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool) Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon...

Open the catalog to page 10

Accessories for ergonomic workplace 2021 - 11

Lateral extension up to 730 mm - Flag opening from 0 to 120° R2 max

Open the catalog to page 11

Accessories for ergonomic workplace 2021 - 12

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) Sturdy vertical column Its increased diameter avoids any swings Automatic downward pushing device (PUSH KIT): teed to apply force when tightening Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy Adjustable vertical stroke limiter (clamps with rubber protection) to prevent the horizontal arm from getting too close to the...

Open the catalog to page 12

Accessories for ergonomic workplace 2021 - 13

For air and electric screwdrivers with start lever For safety reasons, the arms can only be used with models of eTensil screwdrivers that have external clutch adjustment with only lever tightening. Lateral extension up to 760 mm The arm works with 1 pneumatic signal output: so it can be used with pneumatic screwdrivers that have a pneumatic signal output and with eTensil electric screwdrivers that have external clutch adjustment combined with the TPU 2 power supply. The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider...

Open the catalog to page 13