Practical and easy to handle. Effective and powerful. • Stright, pistol, angle models • Modular models

STRAIGHT MODELS � Drill capacity 1 ÷ 10 mm in Ø � Free speed: 600 ÷ 22,000 rpm � Watt: 130 ÷ 400 Watt � Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Effective and with favourable power-to-weight ratio • Ideal for drilling on horizontal surfaces • Collet-type models for holding the accessory • Quiet and compact • Insulated non-slip grips • Lever start, even at low speeds to help with seating the bit (for FZ,FY models) The 30F models, specific for the aerospace sector, are equipped with motors and epicyclic reduction gears that ensure effective performance even in heavy...

30F, D, FZ, FY... = Models without chuck * Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT: 1: J 0 taper - 2: Threaded 3/8” x 24 UNF. - 3: Threaded 1/2” x 20 UNF.

Air drillsPISTOL MODELS • Drill capacity 1vi3 mm in 0 • Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Effective and with favourable power-to-weight ratio • Ideal for drilling on vertical surfaces • Collet-type models for holding the accessory • Insulated non-slip grips • Geometries designed to guide the bit accurately and safely to avoid harmful flexing of the wrist • The pistol grip is always the best option for holes greater than 6-8 mm in diameter because it is better suited to applying the right driving force The 30F models, specific for the aerospace sector, are...

Accessories? You can find them here. 30F, FDE, FY, FO ... = Models without chuck Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT: 1: J 0 taper - 2: Threaded 3/8” x 24 UNF. - 3: Threaded 1/2” x 20 UNF.

ANGLE MODELS � Drill capacity 1÷ 13 mm in Ø � Free speed: 500 ÷ 4,500 rpm � Watt: 130 ÷ 400 Watt � Type: Self-locking chuck, keyed chuck, without chuck, with collet chuck • Ideal for drilling in small, hard-to-reach spaces, such as against walls or near profiles and shaped sections • Rugged 30° and 90° angle drilling heads • Fast and with favourable power-to-weight ratio • Collet-type models for holding the accessory • Quiet and compact • Insulated non-slip grips The 30F models, specific for the aerospace sector, are equipped with motors and epicyclic reduction gears that ensure effective performance...

Accessories? You can find them here. 30F, FZ, FY...A = Self-locking chuck 30F, FZ, FY...C = Keyed chuck 30F, FZ, FY... = Models without chuck Chuck capacity: The capacity given is the maximum recommended. OUTPUT SHAFT:

MODULAR MODELS � Straight and pistol motors/drills � Free speed: 1,200÷6,200 rpm � Watt: 300 Watt � Quick change to get different configurations in a matter of seconds The 30F 300 Watt air drills are extremely versatile because the same motor/drill can be combined with different drilling heads so that the same tool can provide different operating configurations, such as those demanded in the aerospace industry. Moreover, their new-generation motors and epicyclic reduction gears ensure effective performance even in heavy working conditions, as well as with sub-optimal supply pressures. These fast...

MODULAR STRAIGHT DRILLS _ MODULAR PISTOL-GRIP DRILLS _ OUTPUT SHAFT: Threaded 3/8” x 24 UNF. COMPATIBLE DRILLING HEADS DRILLING HEAD COLLETS FOR MODULAR DRILLS STRAIGHT HEAD - 1/4 STRAIGHT HEAD - 9/32 CODE DIMENSIONS OUTPUT TYPE Accessories for ergonomically sound workplaces?

October 2023 - 108_30F | Printed on recycled paper for the safeguard of the environment | Copyright Fiam Spa. The unauthorised distribution and/or reproduction of all or part of this publication is strictly forbidden. Fiam Utensili Pneumatici Spa Viale Crispi 123 36100 Vicenza, Italy Tel. +39.0444.385000 Fax +39.0444.385002 Fiam France Succursale 73, cours Albert Thomas 69003 Lyon, France Tel. +33 (0)9 70 40 73 85 Fiam España Sucursal Travessera de Gràcia, 11, 5ª planta 08021 Barcelona, España Tel. +34.636808112 Quality Management System Certificate • Environmental Management System Certificate...