15C Air screwdrivers


Catalog excerpts

15C Air screwdrivers - 1

Core innovation Straight, pistol and angle 15C air screwdrivers and nutrunners Torque range: from 0,4 to 5 Nm Automatic shut-off Body perfection

Open the catalog to page 1
15C Air screwdrivers - 2

Searching for excellence, developing ideas. Are you looking for innovation, practicality and accuracy? Only the range of 15C tools can satisfy your needs. A modern range, ideal in every type of industrial assembly: to overcome the performance’s challenge with different control levels of the whole assembly process. For this reason each 15C tool is also designed to monitor the assembly cycle (poka-yoke system, anti-error system) or the joint, ensuring extraordinary results. 15C screwdrivers: perfection has a new name and a new number. Screwdrivers and nutrunners with TRACS2 torque control...

Open the catalog to page 2
15C Air screwdrivers - 3

Control levels of the assembly process Level 2 Level 1 Torque control Torque control, screws counting • TRACS2 CLUTCH • ACCURATE TIGHTENINGS • HIGH REPEATABILITY • COUNTING OF TIGHTENED SCREWS • ACCURATE TIGHTENINGS • OK / KO CYCLE • HIGH REPEATABILITY • MONITORING OF THE TIGHTENING TIME Angle nutrunner

Open the catalog to page 3
15C Air screwdrivers - 4

15C screwdrivers/nutrunners with TRACS2 torque control An eye for innovation, a glance to the future. For over 65 years Fiam has been moving towards the future and research. So it has designed the modern 15C air screwdrivers/ nutrunners, increasing quality and performances. Straight, pistol and angle tools are characterized by their extreme handiness and ergonomic grip: ideal for working with high productivity and minimum effort. Modern solutions ideal in mechanical, electrical, electronics and furniture fields. Long lever star. The handling of the tool is easier Comfortable and reduced...

Open the catalog to page 4
15C Air screwdrivers - 5

Comfortable and reduced effort reverse cursor Ergonomic grip with no slip sheath for safe and comfortable tool holding ROLLBOX reduction gear system Low effort button with gradual starting system TRACS2 torque control system Quick-change chuck with easy and safe use Reversibility next to starting button and triple air inlet This range of tools is particularly suitable for applications where screw loosening is recurring as into electric/electronic fields, assembly of wires harness and when it is necessary to untighten several times to realign parts when not correctly tightened on the...

Open the catalog to page 5
15C Air screwdrivers - 6

Don’t be satisfied with the maximum Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs Considerable increase of the efficiency of the tightening cycle thanks to innovative systems 1 TRACS2 (Torque Repeatability and Accuracy Control System): the torque control system ensures a very high torque repeatability, i.e. a very low Mean Shift value also in the presence of variability of the joint softness level. This system maintains same torque values for hundreds of thousands of cycles. TRACS2 system...

Open the catalog to page 6
15C Air screwdrivers - 7

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety PISTOL GRIP Minimal dimensions: these tools can be used in every position and when space is limited. Their handling is guaranteed because the grip is very near to the tool’s head Weight: extremely reduced weight and compact dimensions guarantee perfect handling Ergonomic grips: designed according to modern biomechanics principles paying particular attention to the features of the female hand. The grips are manufactured with an ergonomic sheath made of...

Open the catalog to page 7
15C Air screwdrivers - 8

Tightening torque on soft joint Models with reversibility next to starting button 15C2APA-2200-R Models with reversibility next to starting button and triple air inlet 15C2APA3I Models with threaded drive for screw suction system 15C2A-FT

Open the catalog to page 8
15C Air screwdrivers - 9

Models with reversibility next to starting button and triple air inlet 15C2APA3I Models with threaded drive for screw suction system 15C2A-FT Legend 15 = Power of the motor in Watt/10 • C = Screwdriver/Nutrunner • 2 = Maximum tightening torque in Nm • A = Air shut-off system • L = Lever start • PA = ‘Forward’ pistol grip • 30 = Head at 30° • 90 = Head at 90° • 2200 = Idle speed • R = Reversibility • 3I = 3 Inlets (3 air inlets) • FT = (Front Thread) Equipped with threaded drive for screw suction system Legend Reversibility: all models are suitable for tightening and untightening operations...

Open the catalog to page 9
15C Air screwdrivers - 10

Other technical feature TRACS2 clutch spring Assembled on the tool grey colour - Ø wire 3,2 mm Code 595103202 Supplied black colour - Ø wire 2,2 mm Code 595102204 Tightening torque on soft joint (Nm) Tightening torque on soft joint (Nm) Recommended hose bore Dimensions (mm) of angle models B Other technical features Models Recommended hose bore 15C air screwdrivers/nutrunners are designed for use with lubricated and unlubricated compressed air Standard equipment (supplied with the tool) • Clutch adjustment key • Additional clutch spring (only for straight and pistol models) • Hanging ring •...

Open the catalog to page 10
15C Air screwdrivers - 11

15C screwdrivers/nutrunners with TRACS2 torque control + SCREWS COUNTING 0% error, 100% accuracy. Did you lose any screws? The ‘screws count’ function will help you: therefore in case of high production rate, you won’t risk any omission. Moreover, the feed-back signal and the end one to pass to next piece accelerate the production cycles and ensure control on the assembled products. So dead times will decrease and quality will increase. • Lever or push button air shut-off 15C SCREWDRIVERS equipped with pneumatic pick-up signal (ported) • COMPUTERIZED MONITORING UNIT TOM (Tightening...

Open the catalog to page 11
15C Air screwdrivers - 12

Tightening Operation Monitor Model Electric feed Monitoring unit width 208 x depth 128 x height 42 Standard equipment • Feeder • Feed cable • Use and maintenance manual • Eco-friendly packaging TOM Tightening Operation Monitor is also available in the configuration BOX TOM, that includes: TOM unit and all its accessories already wired in a single box. This “Plug and Play’ solution is easy to introduce into assembly lines and extremely practical since you just need to connect the air line and the power supply to start production immediately. Model Electric feed Monitoring unit h 265 mm...

Open the catalog to page 12

All FIAM catalogs and technical brochures

  1. Air motors

    50 Pages

  2. Drills-30F

    10 Pages

  3. Air drills

    24 Pages

  4. Air tappers

    16 Pages

Archived catalogs

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Reaction arms

    20 Pages