Core innovation Straight, pistol and angle 15C air screwdrivers and nutrunners Torque range: from 0,4 to 5 Nm Automatic shut-off Body perfection

15C air screwdrivers and nutrunners Searching for excellence, developing ideas. Are you looking for innovation, practicality and accuracy? Only the range of 15C tools can satisfy your needs. A modern range, ideal in every type of industrial assembly: to overcome the performance's challenge with different control levels of the whole assembly process. For this reason each 15C tool is also designed to monitor the assembly cycle (poka-yoke system, anti-error system) or the joint, ensuring extraordinary results. 15C screwdrivers: perfection has a new name and a new number. Level 1 Screwdrivers and...

Control levels of the assembly process Level 2Torque control, screws counting Level 1Torque control • TRACS2 CLUTCH • ACCURATE TIGHTENINGS • HIGH REPEATABILITY • ACCURATE TIGHTENINGS • HIGH REPEATABILITY • COUNTING OF TIGHTENED SCREWS • MONITORING OF THE TIGHTENING TIME

15C screwdrivers/nutrunners with TRACS2 torque control An eye for innovation, a glance to the future. For over 65 years Fiam has been moving towards the future and research. So it has designed the modern 15C air screwdrivers/ nutrunners, increasing quality and performances. Straight, pistol and angle tools are characterized by their extreme handiness and ergonomic grip: ideal for working with high productivity and minimum effort. Modern solutions ideal in mechanical, electrical, electronics and furniture fields. Long lever star. The handling of the tool is easier Comfortable and reduced effort...

Comfortable and reduced effort reverse cursor Ergonomic grip with no slip sheath for safe and comfortable tool holding ROLLBOX reduction gear system Low effort button with gradual starting system TRACS2 torque control system Quick-change chuck with easy and safe use Reversibility next to starting button and triple air inlet This range of tools is particularly suitable for applications where screw loosening is recurring as into electric/electronic fields, assembly of wires harness and when it is necessary to untighten several times to realign parts when not correctly tightened on the component....

Don't be satisfied with the maximum Reliability Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs 1 TRACS2 (Torque Repeatability and Accuracy Control System): the torque control system ensures a very high torque repeatability, i.e. a very low Mean Shift value also in the presence of variability of the joint softness level. This system maintains same torque values for hundreds of thousands of cycles. TRACS2 system guarantees a high quality improvement in 2 MOTRIX: newly conceived air motor ensures...

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety PISTOL GRIP Minimal dimensions: these tools can be used in every position and when space is limited. Their handling is guaranteed because the grip is very near to the tool’s head Weight: extremely reduced weight and compact dimensions guarantee perfect handling Ergonomic grips: designed according to modern biomechanics principles paying particular attention to the features of the female hand. The grips are manufactured with an ergonomic sheath made of bi-component...

Models with reversibility next to starting button

Models with threaded drive for screw suction system 15C2A-FT 15 = Power of the motor in Watt/10 • C = Screwdriver/Nutrunner • 2 = Maximum tightening torque in Nm • A = Air shut-off system • L = Lever start • PA = 'Forward' pistol grip • 30 = Head at 30° • 90 = Head at 90° • 2200 = Idle speed • R = Reversibility • 3I = 3 Inlets (3 air inlets) • FT = (Front Thread) Equipped with threaded drive for screw suction system The figures shown are measured at a pressure of 6,3 bar (ISO 2787) the recommended operating pressure. Tightening torque values have been measured in accordance with ISO 5393 standard....

' clutch spring grey colour- 0 wire 3,2mm black colour- 0 wire 2,2mm Dimensions (mm) of angle models

15C screwdrivers/nutrunners with TRACS2 torque control + SCREWS COUNTING 0% error, 100% accuracy. Did you lose any screws? The ‘screws count’ function will help you: therefore in case of high production rate, you won’t risk any omission. Moreover, the feed-back signal and the end one to pass to next piece accelerate the production cycles and ensure control on the assembled products. So dead times will decrease and quality will increase. • Lever or push button air shut-off 15C SCREWDRIVERS equipped with pneumatic pick-up signal (ported) • COMPUTERIZED MONITORING UNIT TOM (Tightening Operation...

AUTOMATIC CHECK OF TIGHTENING TIME • 8 for programmes selection, 6 for remote functioning: switching off, program activation, tool stop, tool loosening, program reset Availables with contacts 24V/GND (both pull-up and pull-down) for a great compatibility with the bench buttons (i.e: reset, block, unblocking etc.) and to be interface with the PLC of the client • For results, active program, screwdriver status and possible electro-valve activation, auxiliary output, signal waste piece, in cycle signal (to check the beginning and the end of tightening cycle, useful i.e. set/unset the pieces jigs)...

Models with reversibility next to starting button 15C2APA-2200-R-2CS Models with reversibility next to starting button and triple air inlet 15C2APA3I-2CS Legend 15 = Power of the motor in Watt/10 • C = Screwdriver/Nutrunner • 2 = Maximum tightening torque in Nm • A = Air shut-off system • L = Lever start • P = Pistol grip • PA = 'Forward' pistol grip • 30 = Head at 30° • 90 = Head at 90° • 2200 = Idle speed • R = Reversibility • 2Cs = Double-signal pressure Legend U Reversibility: all models are suitable for tightening and untightening operations Lever start Push-button start • The figures shown...