TOM - Tightening Operation Monitor - 12 Pages

Add to MyDirectIndustry favorites
TOM - Tightening Operation Monitor

Catalog excerpts

0% error 100% accuracy TOM Tightening Operation Monitor "Poka Yoke" device for the tightening process

 Open the catalog to page 1

TOM - Tightening Operation Monitor Tightening and monitoring with TOM: the intelligent simplicity TOM unit is a “Poka Yoke” process verification system, entirely designed , and manufactured by Fiam. It verifies in real-time the tightening process status, it guarantees reliability regardless of operator influence and allows skipping the post process quality check. It is an innovative, practical and inexpensive Poka Yoke system (anti-error): at the end of the tightening sequence, the operator is warned about the outcome thus can quickly move to the next assembly job. It warns the operator at...

 Open the catalog to page 2

• nr. of program in use • nr. of screws to be tightened • nr. of set sequence • nr. of screws tightened on the total ACOUSTIC SIGNALS ©©©© Screw OK Program end Error Sequence end 5 LANGUAGES The language can be selected at any stage of programming | | Italian    Spanish CYCLE ENDNOK Maintenance of screwdrivers: thanks to the tightening counter, it is possible to control the number of rundowns, to program the maintenance of the screwdrivers and let them work at rated performances over time Production shifts efficiency under control: thanks to the statistics, it is possible to check the...

 Open the catalog to page 3

Poka Yoke, some curiosities... THE 5 PRINCIPLE OF LEAN MANUFACTURING 1. Specify what creates value from the customers perspective 2. Identify all the steps along the process chain 3. Make those processes flow 4. Make only what is pulled by the customer 5. Strive for perfection by continually removing wastes THE MEANING Poka-yoke (3? 3? B *7) [poka yoke] is a Japanese term that means "mistake-proofing" A poka-yoke is any mechanism in a lean manufacturing process that helps an operator avoid (yokeru) mistakes (poka). Its purpose is to eliminate product defects by preventing, correcting, or...

 Open the catalog to page 4

• 8 for programmes selection, 6 for remote functioning: switching off, program activation, tool stop, tool loosening, program reset Availables with contacts 24V/GND (both pull-up and pull-down) for a great compatibility with the bench buttons (i.e: reset, block, unblocking etc.) and to be interface with the PLC of the client • For results, active program, screwdriver status and possible electro-valve activation, auxiliary output, signal waste piece, in cycle signal (to check the beginning and the end of tightening cycle, useful i.e. set/unset the pieces jigs) Automatic check of tightening...

 Open the catalog to page 6

TOM answers every need TOM can be connected to air shut-off screwdrivers - straight, pistol and angle models - equipped with air pick-up signal. It is also suitable for oil pulse wrenches with air shut-off system (IHE_A) as well as Fiam auto-feeding tightening systems featuring air screwdrivers with telescoping and forward bit stroke device. Choose your screwdriver among more than 100 models available. TOOL LOCKING/UNLOCKING UNIT TOOL LOCKING/UNLOCKING UNIT MULTI-DOCK CONNECTOR Electric screwdriver eTensil E8C2A-2000 E8C3A-1200 E8C3A-900 E8C4A-650 E8C5A-350 E8C4A-650 = Electric screwdriver...

 Open the catalog to page 8

screwdrivers with pneumatic pick-up signal Code    Type Nm    in lb rpm Type Type kg lb 0 x l x h l/s Drive dBA STRAIGT MODELS

 Open the catalog to page 9

Recommended hosa bore 15 = Power of the motor in Watt/10 • C = Screwdriver • 2 = Maximum tightening torque in Nm • A = Air shut-off system • P = Pistol grip PA = Forward' pistol grip • 30 = Head at 30° • 90 = Head at 90° 2200 = Idle speed • R = Reversibility • 3I = 3 inlets (3 air inlets) 2CS = Double-signal pressure • WP = Without push U Reversibility: all models are suitable for tightening and untightening operations I ^ ^ Lever start    |4 Push start "5 _    Push button NOTE: For models with reversibility next to the start button: reversibility switch can be positioned either right or...

 Open the catalog to page 10

MULTI-DOCK CONNECTOR Connecting up to 8 tools (each tool has a dedicated program) that can operate individually depending on TOM programming. There are 2 LEDs for each screwdriver: one indicates the enabled screwdriver (to be used) and one indicates the tool is working. Geared for additional feeding in case of need (feeder upon request). Supplied with adapter for connection with TOM and 2 connecting cables. Cable multi-dock connector /    To connect multi-dock connector with locking/ locking/unlocking device    unlocking device when several screwdrivers are used To connect TOM unit with...

 Open the catalog to page 11

BT-MG MAGNESIUM TELESCOPIC ARMS This solution for ergonomic workplace eliminate torque reaction on operator's wrist. They guarantee reliability and long life span thanks to accurate manufacturing process and innovative, high quality materials used. • Thanks to the telescopic elements (3 for all models and 2 for BT-MG 10...) and different reachable lengths, they adapt themselves to working areas according to productive needs • Double final junction allows maximum freedom of action, great handiness, even when tightening with the tool bent • To be used with any type of tools • Laboratory tests...

 Open the catalog to page 12

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages