Catalogs >
FIAM >
Tightening machine with turntable

Tightening machine with turntable
4Pages

Catalog excerpts

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:35.00pt "Arial", sans-serif; } .font1 { font:11.00pt "Lucida Sans Unicode", sans-serif; } .font2 { font:12.00pt "Lucida Sans Unicode", sans-serif; } .font3 { font:17.00pt "Lucida Sans Unicode", sans-serif; } - 09/2011 Tightening automation Automatic assembly of valves on gas ramps of various sizes Household appliances: Gas barbecue cookers. Fiam have designed and manufactured a tightening machine with turntable to handle the automatic assembly of valves on gas ramps (of various kinds) by means of two screws on a mtal cradle. The solution involves manual component loading, automatic assembly oprations, testing and manual unloading of assembled components. The solution is designed to ensure both that assembly is performed according to set torque parameters and that the resulting ramp is gas tight (and hence that the gaskets of the assembled valves provide a perfect seat) through final testing (micro-leak test). The solution can assemble various gas ramp models, which can accommodate anything between 1 and 4 valves. Particul驪r of and joint Gas ramps to be assembled with valves Tightening urvt with turntable

Open the catalog to page 1

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:12.00pt "Lucida Sans Unicode", sans-serif; } .font1 { font:17.00pt "Lucida Sans Unicode", sans-serif; } .font2 { font:24.00pt "Microsoft Sans Serif", sans-serif; } 1station The valves and ramps are manually placed on the spթcial jig, which is designed to accommodate ramps of various kinds Manual start Օ The turntable starts and the component is transferred to the next station for automatic assembly of the valve on the ramp Customized {ig for diffrent ramp modets 2station The m镩tal cradles and screws are fed...

Open the catalog to page 2

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:12.00pt "Lucida Sans Unicode", sans-serif; } .font1 { font:17.00pt "Lucida Sans Unicode", sans-serif; } The component is positioned so that it "straddles" the ramp on top of the valve by means of the collet installթe! on the slide. which thus acts as a pick and place device; Two screws are tightened on the components through two 15MC5 nutrunner motors with air shut-off; Օ The motors are installed on a single dual-movement slide featuring an offset device since the centre-to-centre distance between the two...

Open the catalog to page 3

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:11.00pt "Lucida Sans Unicode", sans-serif; } .font2 { font:12.00pt "Lucida Sans Unicode", sans-serif; } .font3 { font:17.00pt "Lucida Sans Unicode", sans-serif; } .font4 { font:56.00pt "Lucida Sans Unicode", sans-serif; } .font5 { font:24.00pt "Microsoft Sans Serif", sans-serif; } .font6 { font:8.00pt "Times New Roman", serif; } .font7 { font:10.00pt "Times New Roman", serif; } 3station If the tightening oprations performed are OK (OK status checked by means of PLC)....

Open the catalog to page 4