Cordless screwdrivers - 4 Pages

Add to MyDirectIndustry favorites
Cordless screwdrivers

Catalog excerpts

Cordless Freedom. Working everywhere with maximum productivity. Cordless screwdrivers • Torque range: 0,8    12 Nm • Speed: 250 * 1550 rpm • Automatic electric shut-off

 Open the catalog to page 1

Working everywhere with maximum productivity. BRUSHLESS MOTOR � Without brushes � Low maintenance � Longer tool lifetime � Reduced pollution � Reduced noise level LITHIUM-ION BATTERY � Longer lifetime � Fast recharge (40 minutes) � No memory effect � Easy attached sliding battery system ERGONOMICS � rgonomic grip with soft grip E � eversibility by button switch R � EDs to light up the working area L � colour rings to easily ide

 Open the catalog to page 2

PROCESS UNDER CONTROL � he automatic shut-off torque control system T stops power supply when preset torque is achieved � imed start trigger to avoid repeated start on T already fastened screws � utomatic return in tightening mode after A untightening (function to be programmed) � ound and light signals to help operator S LED AND ACOUSTIC INDICATORS BLUE = REVERSE OPERATION (loosening) GREEN = CYCLE OK Long buzz 5 x buzz Long buzz FLASHING YELLOW = BATTERY LOAD ALERT YELLOW = LOW BATTERY WARNING OPTIMUM SPEED (with Programmer available upon request) � Optimum speed adjustment for...

 Open the catalog to page 3

18 = Power supply in Volts • CB = Brushless electric screwdriver • B = Battery • 3 = Max torque in Nm • P = Pistol grip Legend Reversibility: all models are suitable for tightening and untightening operations The tool supplied turns at the max speed as specified in the catalog, however speed can be adjusted according to the type of application using an accessory called Speed programmer (available upon request) • The tightening torque values has been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. •...

 Open the catalog to page 4

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages