Air screwdrivers 26C - 16 Pages

Add to MyDirectIndustry favorites
Air screwdrivers 26C

Catalog excerpts

Speed. Efficiency. Accuracy. Straight, pistol 26C air screwdrivers • Torque range: from 0,4 to 12 Nm • Automatic shut-off

 Open the catalog to page 1

Searching for excellence, developing ideas. Are you looking for innovation, practicality and accuracy? Only the range of 26C tools can satisfy your needs. A modern 260 Watt power range, ideal in every type of industrial assembly: to overcome the performance’s challenge with different functionality levels and thanks to the control of the whole assembly process. For this reason each 26C tool is also designed to monitor the tightening cycle (poka-yoke system, anti-error system) or the assembled component, ensuring extraordinary results. Screwdrivers with TRACS2 and TRACS3 torque control...

 Open the catalog to page 2

Control levels of the assembly process Level 2 Level 1 TRACS2 and TRACS3 torque control. TRACS2 and TRACS3 torque control + screws counting. • TRACS CLUTCH • ACCURATE TIGHTENINGS • HIGH REPEATABILITY • TRACS CLUTCH • COUNTING OF TIGHTENED SCREWS • ACCURATE TIGHTENINGS • OK / KO CYCLE • HIGH REPEATABILITY • MONITORING OF THE TIGHTENING TIME Pistol UpGrip screwdriver

 Open the catalog to page 3

All Fiam innovation in your hands For over 65 years Fiam has been moving towards the future and research. So it has designed the modern 26C air screwdrivers, increasing quality and performances. Straight, pistol and pistol UpGrip tools are characterized by their extreme handiness and ergonomic grip: ideal for working with high productivity and minimum effort. Modern solutions ideal in mechanical, electrical, electronics and furniture fields. Hanging ring for balancer use ' Predisposition for pneumatic pick-up signal New ergonomic grip for safe and comfortable tool holding Technologically...

 Open the catalog to page 4

Evident and incisive cycle end acoustic signal for operator Hanging ring for balancer use Technologically advanced MOTRIX air motor, ensuring higher performances Safe, practical and precise clutch adjustment system Recyclable materials The design of the new comfortable and reduced effort reverse cursor permits higher bump resistance and manoeuvrability Ergonomic grip with no slip sheath for safe and Quick-change chuck with easy and safe comfortable tool Patented silencing system ROLLBOX reduction gear system, ensuring high output Patented TRACS 2 and TRACS3 (Torque Repeatability and...

 Open the catalog to page 5

Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs MOTRIX: newly conceived air motor ensures long lifetime, high specific power and maximum torque ROLLBOX: new reduction gear system has been designed to guarantee maximum output, long lifetime of the kinematic chain and reduced noise level TRACS2 and TRACS3 (Torque Repeatability and Accuracy Control System): for torques respectively up to 5 Nm and 12 Nm, they are the new tightening torque control systems that ensure a very high torque...

 Open the catalog to page 6

Naturally innovative Perfection is in your hands Optimization of the tool performances in regard to ergonomics and operator safety Ergonomic grip: designed according to modern biomechanics principles paying particular attention to the features of the female hand. The grip is manufactured with an ergonomic sheath made of no slip material making it easier to hold the screwdriver, increasing the hand grip, improving the handling, the thermal isolation and operator's comfort TRACS2 and TRACS3: the modern torque control systems reduce the reaction to the operator's hand. Thanks to the immediate...

 Open the catalog to page 7

26 = Power of the motor in Watt/10 • C = Screwdriver • 4 = Maximum tightening torque in Nm • A = Air shut-off system • L = Lever • P = Pistol grip • PA = 'Forward' pistol grip • PU = upGrip pistol grip • 31 = 3 inlets (3 air inlets) • R = Reversibility U Reversibility: all models are suitable for tightening and untightening operations

 Open the catalog to page 8

Push start Lever start Push button Push button Push button • The figures shown are measured at a pressure of 6,3 bar (ISO 2787) the recommended operating pressure. • Tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. * Additional factor: 3 dBA spread in method and production (ISO 15744). • Vibrations level have been measured in accordance with ISO 28927-2 standards. • Accessory drive: female hexagonal drive 1/4" 6,35 mm (ISO 1173). • The code number must be used when ordering....

 Open the catalog to page 9

26C screwdrivers with TRACS2 and TRACS3 torque control + SCREWS COUNTiNG 0% error, 100% accuracy. Did you lose any screws? The 'screws count' function will help you: therefore in case of high production rate, you won't risk any omission. Moreover, the feed-back signal and the end one to pass to next piece accelerate the production cycles and ensure control on the assembled products. So dead times will decrease and quality will increase. The solution includes: • Lever or push button air shut-off 26C SCREWDRIVERS equipped with pneumatic pick-up signal (ported) • COMPUTERIZED MONITORING...

 Open the catalog to page 10

• 8 for programmes selection, 6 for remote functioning: switching off, program activation, tool stop, tool loosening, program reset Availables with contacts 24V/GND (both pull-up and pull-down) for a great compatibility with the bench buttons (i.e: reset, block, unblocking etc.) and to be interface with the PLC of the client • For results, active program, screwdriver status and possible electro-valve activation, auxiliary output, signal waste piece, in cycle signal (to check the beginning and the end of tightening cycle, useful i.e. set/unset the pieces jigs) Automatic check of tightening...

 Open the catalog to page 12

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages