Air nutrunner motors - 24 Pages

Add to MyDirectIndustry favorites
Air nutrunner motors

Catalog excerpts

Tightening automation. Only excellent solutions. • Tightening torque control system: with air shut-off, with slip clutch, without clutch (stall type) • Tightening torque: from 0,4 up to 40 N

 Open the catalog to page 1

Tightening automation Requirements change, efficiency remains. Accurate, reliable, compact and performing: these are Fiam air nutrunner motors. The ideal solution for many applications in different production fields. Specifically designed and manufactured for industrial automation, they are used in single or multi-spindle, manual or fixtured tightening units. Nutrunners can be installed in automatic assembly lines, in rotarytable machines, on multi-spindle tightening units, on fastening slides, anthropomorphic robots. They are suitable for every type of joint. Extremely robust, they...

 Open the catalog to page 2

The right solution for every need. Needs aren’t the same for everyone, therefore everybody should be able to get customized solutions. Different torque control systems are available and can be chosen depending on application and type of joint and fastener. AIR NUTRUNNER MOTORS WITH AIR SHUT -OFF Thanks to the automatic and immediate air shut-off device, these motors guarantee high torque repeatability. Ideal to assemble components manufactured with high quality materials (for example in assembly of car components). They can be equipped with built-in torque transducer: besides verifying...

 Open the catalog to page 3

Don’t be satisfied with the maximum A careful design guarantees long lifetime and reliability of the components which results in high productivity, reduced maintenance and repair costs Considerable increase of the efficiency of the production cycle thanks to innovative systems Fiam air nutrunner motors aren’t standard screwdrivers adjusted to be installed on a machine, instead they are solutions specifically and accurately designed to be used in the industrial automation field. Their main features to be used in automation applications are: • robust thrust bearings to stand up to the fast...

 Open the catalog to page 4

Perfection is in your hands Naturally innovative Ergonomics Ecology Enhancement of tool performances in regard to ergonomics and operator’s safety Available in reversible and non reversible versions. Reversible motors are provided with two entrances for compressed air that permit alternatively the input and the output of the compressed air. REVERSIBLE Innovative systems designed paying even more attention to the environment and its safeguard Reduced noise level: the effective silencing systems guarantee a reduced noise level caused by air exhaust in compliance with International standards....

 Open the catalog to page 5

Nutrunner motors with air shut-off Type of motor I Tightening torque I I § I I I I/ /

 Open the catalog to page 6

• Noise level has been measured in accordance with ISO 3744 and ISO 15744. * Additional factor: 3dBA spread in method and production (ISO 15744). • Noise level has been indicated as guide for machine manufacturer that install these motors • The figures shown are measured at a pressure of 6,3 bar (in accordance with ISO 2787), the recommended operating pressure. • Tightening torque values have been measured in accordance with ISO 5393 standard. • Accessory drive: 1/4” 6,35 mm female hexagonal drive (ISO 1173); , male square drive (ISO 1174). • The code number must be used when ordering. •...

 Open the catalog to page 7

Nutrunner motors with slip clutch Tightening torque 5^ Screw rotation clockwise * ft Reversibility:The models are suitable for ^ tightening and untightening operations 1 The figures shown are measured at a pressure of 6,3 bar (in accordance with ISO 2787), the recommended operating pressure. 1 The tightening torque values have been measured in accordance with ISO 5393 standard. 1 Accessory drive: 1/4',' 6,35 mm female hexagonal drive 1 The code number must be used when ordering. 1 For installation instructions see 'Use and maintenance Torque values are to be considered purely indicative and...

 Open the catalog to page 8

I Chart of torque range obtainable with clutch springs assembled on the tool or supplied with Standard equipment (supplied with the motor) • Supplementary clutch spring (except for MCY.. • Eco-friendly packaging Accessories available upon request • Bits, sockets, conveyors and other compressed air system accessories: (see Accessories • Accessories for automation (see on page 21) • Axial compensators and flange bracket (see on Models available upon request • Models with quick change chuck • Models with modified flange and/or with customized casing • Models with axial compensator • Models...

 Open the catalog to page 9

Nutrunner motors without clutch upon request upon request upon request upon request upon request upon request Legend Screw rotation clockwise Reversibility: The models are suitable for tightening and untightening operations Standard equipment (supplied with the motor) • Use and maintenance manual • Eco-friendly packaging • The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. • Accessory drive: 1/4” , *6,35 mm female hexagonal drive (ISO 1173). • The code number must be used when ordering. • For installation instructions see ‘Use and...

 Open the catalog to page 10

How to get different values of power, torque and speed. Performances of nutrunner motors without clutch can be modified with continuity by means of a pressure or throttling regulator that reduces or increases the air quantity in the motor. Consequently there is a decrease or an increase of the power, torque and speed values according to ratios shown in chart 1. There are two methods to adjust performances of nutrunner motors without clutch: • Installing the air flow governor on the air inlet coupling, stall torque is controlled. • installing air flow governor on air exhaust coupling...

 Open the catalog to page 11

Dimensions Nutrunner motors with air shut-off M5 signal port fitting Lockcover ring M21,7x1 left Accessory drive with 1/4”hex. quick change chuck (Din 3126-F 6,3) 12 Recommended locking space 29.2 M5 signal port fitting M5 signal port fitting 20MC...A/20MC...RA/20MCS...A MODELS WITH AXIAL COMPENSATOR Models 3/8" square drive axial compensator (Din 3121-F 10) (cod.680601070) 10,7 Air exhaust silencer 20MC...A / 20MCS...A 1/8"gas air inlet Axial compensator with 1/4" hex. quick change chuck (Din 3126-F 6,3) (cod.680601080) M5 signal port fitting M5 signal port fitting 105,6 Air exhaust silencer...

 Open the catalog to page 12

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages