Accessories for ergonomic workplace
24Pages

{{requestButtons}}

Catalog excerpts

Accessories for ergonomic workplace - 1

• Magnesium telescopic arms • Cartesian arms • Articulated cartesian arms • Assisted Cartesian arms • Positionning devices • Balancing arms - Balancers • Auxiliary grips

Open the catalog to page 1
Accessories for ergonomic workplace - 2

Accessories for ergonomic workplaces In order to improve productivity and product quality safeguarding operator’s health, it is strategically important to design the workplace in a ergonomic and rational way. To do that, parts to be assembled and tools to be used must be easy to collect and handle. The focus of ergonomics is a strong point of Fiam solutions. All solutions are designed and built to reduce any kind of fatigue for operator, to ensure maximum safety of use and to increase production performance. On these issues Fiam also offers a qualified consulting and training activity. Fiam...

Open the catalog to page 2
Accessories for ergonomic workplace - 3

Many factors have to be considered in order to design an ergonomic workplace, namely: Using last generation tools which eliminate the beginning operator’s risk factors. The tools must be chosen according to the type of joint, of screws, of operator’s position at workplace (sitting or standing). l Use of accessories that, according to their combination, can solve specific logistic and productive needs. Accessories need to be specified according to tool type, type and dimensions of workplace, type and dimensions of workpiece. Accurate design of workplace which has to consider ideal geometry...

Open the catalog to page 3
Accessories for ergonomic workplace - 4

BT-MG MAGNESIUM TELESCOPIC ARMS New range of telescopic arms in magnesium alloy, designed and produced by Fiam. Conform for use with any kind of tool (screwdrivers/nutrunners, drills, tappers) being extremely resistant to mechanical stress thus guaranteeing reliability and long life span, thanks to accurate manufacturing process and applied innovative materials. Designed with different telescoping extension elements (3 for all models and 2 for BT-MG 10...), they are conform for working areas according to various productive needs: from a minimum of 45,5 cm to a maximum of over 2 meters....

Open the catalog to page 4
Accessories for ergonomic workplace - 5

• Wide Operating Area • ide rotation W of the tool around its axis • They eliminate any counterblow to operator’s hands • They eliminate vibrations caused by the tool • Reduce the worker’s fatigue in handling the equipment • They assure a comfortable and immediate taking of the tool next to the point of work • Enable the operator to keep a good wrist position • They prevent musculoskeletal diseases caused by repeated mechanical stresses • Fiam BT-MG arms absorbe the reaction 30% more than the other arms o

Open the catalog to page 5
Accessories for ergonomic workplace - 6

Standard equipment (supplied with arm)

Open the catalog to page 6
Accessories for ergonomic workplace - 7

CARTESIAN ARMS The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in 2 versions: • Cartesian arms • Articulated Cartesian arms • Assisted Cartesian arms BC25 PK with automatich pushing force BC40 LK with pneumatic locking device for auto...

Open the catalog to page 7
Accessories for ergonomic workplace - 8

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) Sturdy vertical column Its increased diameter avoids any swings Upon request: adjustable vertical stroke limiters (clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool) Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and...

Open the catalog to page 8
Accessories for ergonomic workplace - 9

Lateral extension up to 760 mm The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimum space (R1 - R2).

Open the catalog to page 9
Accessories for ergonomic workplace - 10

Sturdy vertical column Its increased diameter avoids any swings Upon request: adjustable vertical stroke limiters (clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool) Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and...

Open the catalog to page 10
Accessories for ergonomic workplace - 12

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) Sturdy vertical column Its increased diameter avoids any swings Automatic downward pushing device (PUSH KIT): eed to apply force when tightening Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy Pneumatic pushing force regulator set according to the type of screw used. Equipped with operating pressure indicator. "Dual...

Open the catalog to page 12
Accessories for ergonomic workplace - 13

For air and electric screwdrivers with start lever For safety reasons, the arms can only be used with models of eTensil screwdrivers that have external clutch adjustment with only lever tightening. Lateral extension up to 760 mm The arm works with 1 pneumatic signal output: so it can be used with pneumatic screwdrivers that have a pneumatic signal output and with eTensil electric screwdrivers that have external clutch adjustment combined with the TPU 2 power supply. BASE DETAIL The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach...

Open the catalog to page 13
Accessories for ergonomic workplace - 14

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) For CA auto-feed screwdrivers with automatic forward bit stroke Sturdy vertical column Its increased diameter avoids any swings Ball recirculating runners Vertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy The BC40 LK arm is for use with auto-feed screwdrivers with automatic forward bit stroke, which provide an automatic pushing force on the...

Open the catalog to page 14

All FIAM catalogs and technical brochures

  1. Drills-30F

    10 Pages

  2. Air motors

    36 Pages

  3. Air drills

    24 Pages

  4. Air tappers

    16 Pages

Archived catalogs

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Reaction arms

    20 Pages