Accessories for ergonomic workplace - 20 Pages

Add to MyDirectIndustry favorites
Accessories for ergonomic workplace

Catalog excerpts

Accessories for ergonomic workplace flam • Magnesium telescopic arms • Cartesian arms • Articulated cartesian arms • Positionning devices • Balancing arms - Balancers • Auxiliary grips

 Open the catalog to page 1

Accessories for ergonomic workplaces In order to improve productivity and product quality safeguarding operator’s health, it is strategically important to design the workplace in a ergonomic and rational way. To do that, parts to be assembled and tools to be used must be easy to collect and handle. The focus of ergonomics is a strong point of Fiam solutions. All solutions are designed and built to reduce any kind of fatigue for operator, to ensure maximum safety of use and to increase production performance. On these issues Fiam also offers a qualified consulting and training activity. Fiam...

 Open the catalog to page 2

Many factors have to be considered in order to design an ergonomic workplace, namely: Using last generation tools which eliminate the beginning operator’s risk factors. The tools must be chosen according to the type of joint, of screws, of operator’s position at workplace (sitting or standing). l Use of accessories that, according to their combination, can solve specific logistic and productive needs. Accessories need to be specified according to tool type, type and dimensions of workplace, type and dimensions of workpiece. Accurate design of workplace which has to consider ideal geometry...

 Open the catalog to page 3

BT-MG MAGNESIUM TELESCOPIC ARMS New range of telescopic arms in magnesium alloy, designed and produced by Fiam. Conform for use with any kind of tool (screwdrivers/nutrunners, drills, tappers) being extremely resistant to mechanical stress thus guaranteeing reliability and long life span, thanks to accurate manufacturing process and applied innovative materials. Designed with different telescoping extension elements (3 for all models and 2 for BT-MG 10...), they are conform for working areas according to various productive needs: from a minimum of 45,5 cm to a maximum of over 2 meters....

 Open the catalog to page 4

• Wide Operating Area • Wide rotation of the tool around its axis • They eliminate any counterblow to operator's hands • They eliminate vibrations caused by the tool • Reduce the worker's fatigue in handling the equipment • They assure a comfortable and immediate taking of the tool next to the point of work • Enable the operator to keep a good wrist position • They prevent musculoskeletal diseases caused by repeated mechanical stresses • Fiam BT-MG arms absorbe the reaction 30% more than the other arms on the work point

 Open the catalog to page 5

Tool holder accessory Standard equipment (supplied with arm) • Universal clamp with 2 kits of screws with different lengths to install tools with different diameter from 26.5 up to 50 mm • Eco-friendly packaging • Use and maintenance manual • Tool holder accessory (1) for electric screwdrivers eTensil cod. 692079180. Manages 9 positions of rotations.

 Open the catalog to page 6

A system, entirely designed and built by Fiam, to achieve the advantages of a Smart Factory where technology allows a better man-machine collaboration. Magnesium telescopic arms can be fitted with a position monitoring device and, combined with the TPM monitoring unit, help make tightening systems very suitable for "Poka-Yoke” processes, while increasing the efficiency and speed of the production cycle. In fact, they not only make the work station more ergonomic for the hand-arm system, but the man-machine collaboration also increases performance: the system supports operators and guides...

 Open the catalog to page 7

How to order? The tightening system consists of: • BT-MG telescopic arm complete with sensors for the position’s detection (to choose in the chart at page 8) • TPM monitoring unit cod. 692078019 • Connecting cable to choose according to the configuration of use Cable TPM/TOM Electric Screwdriver Power Supply Unit TPU 2 Electronic High Tech DC Tightening System Cable TPM/XPAQ Air Automatic Screw Feeding System Cable TPM/CA Electronic Automatic Screw Feeding System High Tech dc Screwdrivers

 Open the catalog to page 8

BT-MG Magnesium Telescopic Arm with Positioning Monitoring Device Standard equipment (supplied with arm) • Universal clamp with 2 kits of screws with different lengths to install tools with different diameter from 26.5 up to 50 mm • Eco-friendly packaging • Use and maintenance manual

 Open the catalog to page 9

CARTESIAN ARMS The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in 2 versions: • Cartesian arms • Articulated Cartesian arms All models are also available with a position monitoring device for processing the angular and linear...

 Open the catalog to page 10

Double balancer provided Two balancers are available to support the tool (weight up to 11 Kg.) and other hanging elements (models for heavier tools are available upon request) Rubber bumpers Sturdy vertical column Its increased diameter avoids any swings Upon request: adjustable vertical stroke limiters “Rubber bumpers” useful to cushion the limit switches (clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool) Safety magnet which keeps the horizontal stroke locked Ball...

 Open the catalog to page 11

760 mm Lateral extension up to 760 mm The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimum space (R1 - R2).

 Open the catalog to page 12

Lateral extension up to 730 mm - Flag opening from 0 to 120° Possibility of arranging the arm both with the joint on the right and on the left depending on the field of work to be covered and up to 120°. For an excellent reaction to the torque it is advisable to work with the angular opening between 90° and 120°. The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimum space (R1 - R2). Standard equipment • Universal clamp • 2 balancers • Instructions for assembly and use • Eco-friendly...

 Open the catalog to page 13

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages