S450-1 (450 kVA) Scania power open generator set

Product catalog summary

Prime Rating: This rating is for continuous electrical power supply at variable load, replacing commercially purchased power. It allows for 10% overload for 1 hour in every 12 hours, with no annual operation hour limits.

Standby Rating: Used for continuous power supply during utility power failures, with no overload permitted. The alternator is peak continuous rated as per ISO 8528-3.

Standard Reference Conditions: Conditions include 25°C air inlet temperature, 100m above sea level, and 30% relative humidity. Fuel consumption is based on diesel fuel with specific gravity of 0.85, conforming to BS2869: 1998, Class A2.

Output Ratings and Performance Data: The generating set model S450-1 has a prime power of 410.0 kVA and standby power of 450.0 kVA. It operates at 1800 RPM with a frequency of 60 Hz and a fuel tank capacity of 250 liters.

Dimensions and Weights: The set measures 3480 mm in length, 1120 mm in width, and 2075 mm in height. Dry weight is 2919 kg, and wet weight is 2953 kg.

Fuel Consumption: At 100% load, the prime fuel consumption is 80.4 liters per hour, and standby consumption is 88.8 liters per hour.

Available Options: Options include sound attenuated enclosures, control and synchronizing panels, additional alarms, and various exhaust silencer noise levels.

Exhaust System: Includes details on silencer type, noise reduction level, and exhaust gas flow and temperature.

Lubrication and Cooling Systems: The lubrication system uses a spin-on, full-flow oil filter with a total oil capacity of 48 liters. The cooling system has a capacity of 45 liters and uses a centrifugal water pump.

Engine Technical Data: The engine is a Scania DC13072A, 6-cylinder, inline, 4-stroke, turbocharged, with a displacement of 12.7 liters and a compression ratio of 16.3:1.

Alternator Physical Data: Manufactured by WEG, the alternator model is GTA311AI41, with an insulation class H and IP21 ingress protection rating.

Warranty: Prime equipment has a one-year warranty, while standby equipment has a two-year warranty limited to 500 running hours per year.

General Information: FG Wilson, a trading name of Caterpillar (NI) Limited, manufactures products in multiple countries and operates through a global dealer network.

Catalog excerpts

S450-1 (450 kVA) Scania power open generator set-1

Output Ratings Ratings at 0.8 power factor. Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak, continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m Fuel consumption data at full load with diesel fuel with specific gravity of Ratings and Performance Data Engine Make & Model: Alternator Model: Control Panel: Base Frame: Circuit Breaker Type: Fuel Tank Capacity: Fuel Consumption: l/hr (US gal/hr) Image for illustration purposes only. Heavy Duty Fabricated Steel Available Options FG Wilson offer a range of optional features to tailor our generating sets to meet your power needs. Options include: • A wide range of Sound Attenuated Enclosures • A variety of generating set control and synchronising panels • Additional alarms and shutdowns • A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: Wet = With Lube Oil and Coolant Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22. Generating set pictured may include optional accessories.

Open the catalog to page 1

S450-1 (450 kVA) Scania power open generator set-2

Engine Technical Data Cooling Method: Governing Type: Governing Class: Compression Ratio: Engine Electrical System: - Voltage / Ground - Battery Charger Amps Gross Engine Power: kW(hp) Fuel System Fuel Filter Type: Recommended Fuel: Fuel Consumption: l/hr (US gal/hr) Charge Cooled Paper Filter Element (Based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Replaceable Element Cooling System Cooling System Capacity: I (US gal) Water Pump Type: Heat Rejected to Water & Lube Oil: Heat Radiation to Room: Heat radiated from engine and alternator Radiator Fan Load: kW(hp) Radiator...

Open the catalog to page 2

S450-1 (450 kVA) Scania power open generator set-3

Alternator Physical Data Alternator Operating Data Insulation Class: Winding Pitch Code: Ingress Protection Rating: Excitation System: Voltage Regulation: (Steady state) Wave Form NEMA = TIF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: kW(Btu/min) Suppression is in line with European Performance Data: Data Item Motor Starting Short Circuit Reactances shown are applicable to prime ratings. *Based on 30% voltage dip at 0.6 power factor.

Open the catalog to page 3

S450-1 (450 kVA) Scania power open generator set-4

General Information A full set of operation and maintenance manuals and circuit wiring diagrams. The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. FG Wilson is a fully accredited ISO 9001 company. All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two year manufacturer's warranty. For details on warranty cover please contact your local Dealer, or visit our website: FGWilson.com. Dealer contact details: FG Wilson manufactures product in the following locations: Northern...

Open the catalog to page 4