P910P1-P1000E1 (910-1000 kVA) Open Generator Set

Product catalog summary

Prime Rating: This rating is for continuous electrical power supply at variable load, replacing commercially purchased power. It allows for 10% overload for 1 hour in every 12 hours without annual operation limits.

Standby Rating: Used for continuous power supply during utility failures, with no overload permitted. The alternator is peak continuous rated as per ISO 8528-3.

Standard Reference Conditions: Conditions include 25°C air inlet temperature, 100m altitude, and 30% relative humidity. Fuel consumption is based on diesel fuel with specific gravity of 0.85, conforming to BS2869: 1998, Class A2.

Output Ratings and Performance Data: The generator set is manufactured by FG Wilson with a Leroy Somer alternator. It includes a Perkins 4008TAG1A engine, with prime power of 910.0 kVA and standby power of 1000.0 kVA. The engine speed is 1500 RPM.

Fuel Consumption: At 100% load, fuel consumption is 194.4 l/hr for prime and 217.2 l/hr for standby.

Available Options: Options include CE certification upgrade, sound attenuated enclosures, control and synchronizing panels, additional alarms, and various exhaust silencer noise levels.

Exhaust System: Maximum allowable back pressure and exhaust gas flow are specified, with different values for 50 Hz and 60 Hz operations.

Lubrication and Cooling Systems: The system includes a spin-on, full-flow oil filter, with a total oil capacity of 153.0 liters. The cooling system is designed for ambient conditions up to 50°C.

Engine Technical Data: The engine is an 8-cylinder, in-line, 4-stroke with turbocharged air-to-air charge cooling. It operates at 1500 RPM with a compression ratio of 13.6:1.

Alternator Physical Data: Manufactured by Leroy Somer, the alternator has an insulation class H and is protected to IP23. It features an AREP excitation system and an AVR model R450M.

Warranty: Prime equipment has a one-year warranty with unlimited hours or two years limited to 6,000 hours. Standby equipment has a three-year warranty limited to 500 hours per year.

Catalog excerpts

P910P1-P1000E1 (910-1000 kVA) Open Generator Set-1

P910P1/P1000E1 Image for illustration purposes only. Output Ratings Ratings and Performance Data Voltage, Frequency Ratings at 0.8 power factor. Please refer to the output ratings technical data section for specific generator set outputs per voltage. Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2. Engine Make & Model: Alternator manufactured for FG Wilson by: Leroy Somer Alternator Model: Control Panel: Base Frame: Heavy Duty Fabricated Steel Circuit Breaker Type: Fuel Tank Capacity: Fuel Consumption: l/hr (US gal/hr) - Prime 194.4 (51.4) Available Options FG Wilson offer a range of optional features to tailor our generating sets to meet your power needs. Options include: Upgrade to CE Certification A wide range of Sound Attenuated Enclosures A variety of generating set control and synchronising panels Additional alarms and shutdowns A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: www.FGWilson.com Dimensions and Weights Length (L) Wet = With Lube Oil and Coolant Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22. Generating set pictured may include optional accessories.

Open the catalog to page 1

P910P1-P1000E1 (910-1000 kVA) Open Generator Set-2

Engine Technical Data Replaceable Element Combustion Air Flow: m³/min (cfm) Bore / Stroke: mm (in) Induction: Turbocharged Air To Air Charge Cooled Cooling Method: Governing Type: Governing Class: Max. Combustion Air Intate Restriction: kPa (in H2O) Compression Ratio: Cooling System Moment of Inertia: kg m² (lb/in²) Cooling System Capacity: l (US gal) Water Pump Type: Engine Electrical System: - Voltage / Ground - Battery Charger Amps Weight: kg (lb) Heat Rejected to Water & Lube Oil: - Prime 300.0 (17061) Heat Radiation to Room: Heat radiated from engine and alternator - Prime 113.2 (6438) -...

Open the catalog to page 2

P910P1-P1000E1 (910-1000 kVA) Open Generator Set-3

Alternator Physical Data Alternator Operating Data Insulation Class: Winding Pitch Code: Ingress Protection Rating: Excitation System: Leroy Somer Voltage Reguation: (Steady state) +/- 0.5% Wave Form NEMA = TIF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: kW (Btu/min) Suppression is in line with European Performance Data: Data Item Motor Starting Short Circuit

Open the catalog to page 3

P910P1-P1000E1 (910-1000 kVA) Open Generator Set-4

General Information A full set of operation and maintenance manuals and circuit wiring diagrams. The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. FG Wilson is a fully accredited ISO 9001 company. All prime equipment carries a one year manufacturer's warranty with unlimited hours or two year manufacturer's warranty limited to 6,000 running hours. Standby equipment, limited to 500 running hours per year, has a three year manufacturer's warranty. Dealer contact details: FG Wilson manufactures product in the following locations: Northern Ireland •...

Open the catalog to page 4