1. Catalogs
  2. FG WILSON
  3. P90-3S 90kVA Single Phase Open Generating Set
video corpo

P90-3S 90kVA Single Phase Open Generating Set

P90-3S 90kVA Single Phase Open Generating Set

P90-3S 90kVA Single Phase Open Generating Set

Product catalog summary
Prime and Standby Ratings: The document outlines two types of ratings for generator sets: Prime Rating and Standby Rating. Prime Rating is for continuous power supply at variable loads without annual operation limits, allowing a 10% overload for 1 hour in 12 hours. Standby Rating is for power supply during utility failures, with no overload permitted, and is peak continuous rated as per ISO 8528-3.
Standard Reference Conditions: The standard conditions are 25°C air inlet temperature, 100m above sea level, and 30% relative humidity. Fuel consumption data is based on diesel fuel with specific gravity of 0.85, conforming to BS2869: 1998, Class A2.
Output Ratings and Performance Data: The generator set model P90-3S is detailed with specifications such as engine make (Perkins® 1104C-44TAG2), alternator model (LLB3114H), and control panel type. It operates at 1500 or 1800 RPM with a fuel tank capacity of 218 liters. Dimensions and weights are provided for both dry and wet conditions.
Fuel Consumption: Fuel consumption rates are given for different loads and frequencies (50 Hz and 60 Hz) at both prime and standby ratings.
Cooling and Lubrication Systems: The document specifies the cooling system capacity, water pump type, and heat rejection values. The lubrication system includes details on oil filter type, total oil capacity, and oil cooling method.
Exhaust System: Information on maximum allowable back pressure, exhaust gas flow, and temperature is provided for both prime and standby conditions.
Engine Technical Data: The engine is a 4-cylinder, in-line, 4-stroke with turbocharged air to air charge cooling. It has a displacement of 4.4 liters and a compression ratio of 18.3:1.
Alternator Physical and Performance Data: The alternator is manufactured by Leroy Somer, with specifications on insulation class, winding pitch, and excitation system. Voltage regulation and harmonic content are also detailed.
Standards and Compliance: The generator set complies with standards such as BS5000, ISO 8528, ISO 3046, IEC 60034, and NEMA MG-1.22. It is EU stage II emissions compliant and FG Wilson is ISO 9001 accredited.
Warranty: Prime equipment has a one-year warranty, while standby equipment has a two-year warranty limited to 500 running hours per year.
Available Options: FG Wilson offers optional features like CE certification upgrades, sound attenuated enclosures, and various control panels. Additional alarms, shutdowns, and exhaust silencer noise levels are also available.
See more

Catalog excerpts

P90-3S 90kVA Single Phase Open Generating Set-1

P90-3S Image for illustration purposes only. Output Ratings Ratings and Performance Data Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2. Alternator manufactured for FG Wilson by: Leroy Somer Alternator Model: Control Panel: DCP-10 Heavy Duty Fabricated Steel Circuit Breaker Type: Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Base Frame: Ratings at 1.0 power factor. Engine Make & Model: Fuel Tank Capacity: Fuel Consumption: l/hr (US gal/hr) - Prime Available Options FG Wilson offer a range of optional features to tailor our generator sets to meet your power needs. Options include: Upgrade to CE Certification A wide range of Sound Attenuated Enclosures A variety of generator set control and synchronising panels Additional alarms and shutdowns A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: www.FGWilson.com Dimensions and Weights Length (L) Wet = With Lube Oil and Coolant Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22. Generator set pictured may include optional accessories.

 Open the catalog to page 1
P90-3S 90kVA Single Phase Open Generating Set-2

Engine Technical Data Replaceable Element Combustion Air Flow: m³/min (cfm) Bore / Stroke: mm (in) Induction: Turbocharged Air To Air Charge Cooled Cooling Method: Governing Type: Governing Class: Max. Combustion Air Intake Restriction: kPa (in H2O) Compression Ratio: Cooling System Moment of Inertia: kg m² (lb/in²) Cooling System Capacity: l (US gal) Water Pump Type: Engine Electrical System: - Voltage / Ground - Battery Charger Amps Weight: kg (lb) Heat Rejected to Water & Lube Oil: Heat Radiation to Room: Heat radiated from engine and alternator - Prime Radiator Fan Load: kW (hp) Performance...

 Open the catalog to page 2
P90-3S 90kVA Single Phase Open Generating Set-3

Alternator Physical Data Alternator Operating Data Insulation Class: Winding Pitch Code: Ingress Protection Rating: Excitation System: Leroy Somer Voltage Regulation: (Steady state) +/- 0.5% Wave Form NEMA = TIF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: kW (Btu/min) Suppression is in line with European Performance Data: Data Item Motor Starting Short Circuit

 Open the catalog to page 3
P90-3S 90kVA Single Phase Open Generating Set-4

General Information Documentation A full set of operation and maintenance manuals and circuit wiring diagrams. Generator Set Standards The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. FG Wilson is a fully accredited ISO 9001 company. EU stage II emissions compliant. Warranty All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two year manufacturer's warranty. For details on warranty cover please contact your local Dealer, or visit our website: FGWilson.com. Dealer contact...

 Open the catalog to page 4

All FG WILSON catalogs and technical brochures

  1. P2250-3M

    6  Pages

  2. P7.5-4S

    6  Pages

Archived catalogs

  1. Rental Range

    7  Pages

  2. PG345B3

    4  Pages

  3. PG375B3

    4  Pages

  4. PG1250B2

    4  Pages

  5. PG450B1

    4  Pages

  6. PG525B1

    4  Pages

  7. P7.5-4S

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.