Voltage, Frequency Prime Standby Ratings at 0.8 power factor. Please refer to the output ratings technical data section for specific generator set outputs per voltage. Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22. Generator set pictured may include optional accessories. These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2. FG Wilson offer a range of optional features to allow you to tailor our generator sets to meet your power needs. Options available include: • A wide range of Sound Attenuated Enclosures • A variety of generator set control and synchronising panels • Additional alarms and shutdowns • A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit:

P2250-3M Ratings and Performance Data Engine Make TURBOCHARGED AIR TO WATER CHARGE COOLED Cooling Method Governing Type Governing Class Compression Ratio Battery Charger Amps Engine Performance Data 50 Hz 60 Hz Engine Speed Gross Engine Power Prime kW (hp) Gross Engine Power Standby kW (hp) BMEP Standby

Fuel Filter Type: (Based on diesel fuel with a specific gravity of 0.86 and conforming to BS2869 classA2,EN590 *: Heat radiated from engine and alternator Designed to operate in ambient conditions up to 50°C (122°F). Contact your local FG Wilson Dealer for power ratings at specific site conditions. Spin-On, Full Flow Maximum Allowable Back Pressure: kPa (in Hg) 4 (1.2) Exhaust Gas Flow: Prime Exhaust Gas Flow: Standby m3/min (cfm) 475 (16774) Exhaust Gas Temperature: Prime Exhaust Gas Temperature: Standby °C (°F)

P2250-3M Alternator Physical Data Voltage Code Reactances shown are applicable to prime ratings. *Based on 30% voltage dip at 0.4 power factor. With optional independant excitation system (PMG / AUX winding)

Prime Standby

Dealer Contact Details Documentation Operation and maintenance manual including circuit wiring diagrams. Generator Set Standards The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. Caterpillar (NI) Limited is the manufacturer of FG Wilson brand diesel generating sets, and our facilities manufacture products in the following locations: Brazil • China • India With headquarters in Northern Ireland, FG Wilson products are distributed through a Global Dealer Network. To contact your local Sales Office, please visit the FG Wilson website at www.fgwilson.com....