1. Catalogs
  2. FG WILSON
  3. P2000P1/P2000E1
video corpo

P2000P1/P2000E1

P2000P1/P2000E1

P2000P1/P2000E1

Product catalog summary
Prime Rating: This rating is for continuous electrical power supply at variable load, replacing commercially purchased power. It allows for 10% overload for 1 hour in every 12 hours without annual operation limits.
Standby Rating: This rating is for continuous power supply during utility power failures, with no overload permitted. The alternator is peak continuous rated as per ISO 8528-3.
Standard Reference Conditions: Conditions include 25°C air inlet temperature, 100m above sea level, and 30% relative humidity. Fuel consumption is based on diesel fuel with specific gravity of 0.85, conforming to BS2869: 1998, Class A2.
Output Ratings and Performance Data: The generator set is manufactured by FG Wilson with a Leroy Somer alternator. It includes various specifications such as voltage, frequency, engine model, control panel, and circuit breaker type. The engine speed is 1500 RPM, and the fuel tank capacity is specified.
Dimensions and Weights: The generator's dimensions and weights are provided for both dry and wet conditions, with dry including lube oil and wet including lube oil and coolant.
Fuel Consumption: Detailed fuel consumption data is provided for different load percentages at both 50 Hz and 60 Hz frequencies.
Available Options: FG Wilson offers optional features such as CE certification upgrades, sound attenuated enclosures, control panels, additional alarms, and exhaust silencer noise levels.
Exhaust System: Specifications include maximum allowable back pressure, exhaust gas flow, and temperature for both 50 Hz and 60 Hz frequencies.
Lubrication and Cooling Systems: Details on oil filter type, total oil capacity, oil type, cooling system capacity, and heat rejection are provided.
Engine Technical Data: Information on the number of cylinders, cycle, bore/stroke, induction, engine speed, and performance metrics like gross engine power and BMEP is included.
Fuel System: The recommended fuel is Class A2 Diesel or BSEN590, with details on fuel filter type and consumption rates.
Alternator Physical Data: Specifications include the manufacturer, model, number of bearings, insulation class, winding pitch code, wires, ingress protection rating, excitation system, and AVR model.
Generator Set Standards: The equipment complies with standards such as BS5000, ISO 8528, ISO 3046, IEC 60034, and NEMA MG-1.22. FG Wilson is ISO 9001 accredited.
Warranty: Prime equipment has a one-year warranty with unlimited hours or a two-year warranty limited to 6,000 hours. Standby equipment has a three-year warranty limited to 500 hours per year.
See more

Catalog excerpts

P2000P1/P2000E1-1

P2000-1/P2000-1E Image for illustration purposes only. Output Ratings Ratings and Performance Data Voltage, Frequency Engine Make & Model: Alternator manufactured for FG Wilson by: Leroy Somer Alternator Model: Ratings at 0.8 power factor. Control Panel: Please refer to the output ratings technical data section for specific generator set outputs per voltage. Base Frame: Heavy Duty Fabricated Steel Circuit Breaker Type: Frequency: Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2. Fuel Tank Capacity: Fuel Consumption: l/hr (US gal/hr) - Prime 385.4 (101.8) Available Options FG Wilson offer a range of optional features to tailor our generator sets to meet your power needs. Options include: Upgrade to CE Certification A wide range of Sound Attenuated Enclosures A variety of generator set control and synchronising panels Additional alarms and shutdowns A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: www.FGWilson.com Dimensions and Weights Length (L) Wet = With Lube Oil and Coolant Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22. Generator set pictured may include optional accessories.

 Open the catalog to page 1
P2000P1/P2000E1-2

Engine Technical Data Replaceable Element Combustion Air Flow: m³/min (cfm) 160.0 (6.3)/190.0 (7.5) Turbocharged Air To Water Charge Cooled Cooling Method: Governing Type: Governing Class: Max. Combustion Air Intake Restriction: kPa (in H2O) Compression Ratio: Cooling System Moment of Inertia: kg m² (lb/in²) Cooling System Capacity: l (US gal) Water Pump Type: Engine Electrical System: - Voltage / Ground - Battery Charger Amps Weight: kg (lb) Heat Rejected to Water & Lube Oil: - Prime 620.0 (35259) Heat Radiation to Room: Heat radiated from engine and alternator - Prime 186.6 (10612) - Standby...

 Open the catalog to page 2
P2000P1/P2000E1-3

Alternator Physical Data Alternator Operating Data Insulation Class: Winding Pitch Code: Ingress Protection Rating: Excitation System: Leroy Somer Voltage Regulation: (Steady state) Wave Form NEMA = TIF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: kW (Btu/min) Suppression is in line with European Performance Data: Data Item Motor Starting Short Circuit

 Open the catalog to page 3
P2000P1/P2000E1-4

General Information A full set of operation and maintenance manuals and circuit wiring diagrams. The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. FG Wilson is a fully accredited ISO 9001 company. All prime equipment carries a one year manufacturer's warranty with unlimited hours or two year manufacturer's warranty limited to 6,000 running hours. Standby equipment, limited to 500 running hours per year, has a three year manufacturer's warranty. Dealer contact details: FG Wilson manufactures product in the following locations: Northern Ireland •...

 Open the catalog to page 4

All FG WILSON catalogs and technical brochures

  1. P2250-3M

    6  Pages

  2. P7.5-4S

    6  Pages

Archived catalogs

  1. Rental Range

    7  Pages

  2. PG345B3

    4  Pages

  3. PG375B3

    4  Pages

  4. PG1250B2

    4  Pages

  5. PG450B1

    4  Pages

  6. PG525B1

    4  Pages

  7. P7.5-4S

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.