1. Catalogs
  2. FG WILSON
  3. 10 - 13 kVA Single Phase diesel power generator set
video corpo

10 - 13 kVA Single Phase diesel power generator set

10 - 13 kVA Single Phase diesel power generator set

10 - 13 kVA Single Phase diesel power generator set

Product catalog summary
Prime Rating: This rating is for continuous electrical power supply at variable loads, replacing commercially purchased power. It allows for 10% overload for 1 hour in every 12 hours without annual operation limits.
Standby Rating: Used for continuous power supply during utility failures, with no overload permitted. The alternator is peak continuous rated as per ISO 8528-3.
Standard Reference Conditions: Conditions include 25°C air inlet temperature, 100m altitude, and 30% relative humidity. Fuel consumption is based on diesel fuel with specific gravity of 0.85, conforming to BS2869: 1998, Class A2.
Output Ratings and Performance Data: The generating set model includes specifications for prime and standby power, engine make and model, alternator details, control panel, circuit breaker type, engine speed, and base frame. Dimensions and weights are provided for both dry and wet conditions.
Fuel Consumption: Detailed fuel consumption rates are provided for different load percentages at both 50 Hz and 60 Hz frequencies.
Available Options: Options include CE certification upgrades, sound attenuated enclosures, various control panels, and additional alarms and shutdowns.
Exhaust System: Details on silencer type, model, pressure drop, noise reduction, back pressure, exhaust gas flow, and temperature are provided.
Lubrication and Cooling Systems: Information on oil filter type, oil capacity, cooling system capacity, water pump type, and heat rejection is included.
Engine Technical Data: Includes cylinder alignment, cycle, bore/stroke, induction, engine speed, gross engine power, and fuel system details.
Alternator Physical Data: Specifications include manufacturer, model, bearings, insulation class, winding pitch, wires, ingress protection, excitation system, AVR model, overspeed, voltage regulation, and harmonic content.
Voltage Technical Data: Voltage ratings for prime and standby conditions at 50 Hz and 60 Hz are detailed, along with motor starting capability and short circuit capacity.
Standards and Warranty: The equipment complies with BS5000, ISO 8528, ISO 3046, IEC 60034, and NEMA MG-1.22 standards. FG Wilson is ISO 9001 accredited, and the equipment is EU Stage IIIA emissions compliant. Warranty details are provided for prime and standby equipment.
General Information: FG Wilson operates globally with manufacturing locations in Northern Ireland, Brazil, China, India, and the USA. The company is a trading name of Caterpillar (NI) Limited.
See more

Catalog excerpts

10 - 13 kVA Single Phase diesel power generator set-1

Output Ratings Generating Set Model Prime Ratings at 1.0 power factor. Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak, continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m Fuel consumption data at full load with diesel fuel with specific gravity of Ratings and Performance Data Engine Make & Model: Alternator Model: Control Panel: Base Frame: Circuit Breaker Type: Fuel Tank Capacity: Fuel Consumption: l/hr (US gal/hr) Image for illustration purposes only. Leroy Somer Heavy Duty Fabricated Steel Available Options FG Wilson offer a range of optional features to tailor our generating sets to meet your power needs. Options include: • A wide range of Sound Attenuated Enclosures • A variety of generating set control panels • Additional alarms and shutdowns For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: Dry = With Lube Oil Wet = With Lube Oil and Coolant Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22. Generating set pictured may include optional accessories.

 Open the catalog to page 1
10 - 13 kVA Single Phase diesel power generator set-2

Engine Technical Data Cooling Method: Governing Type: Governing Class: Compression Ratio: Engine Electrical System: - Voltage / Ground - Battery Charger Amps Gross Engine Power: kW(hp) Fuel System Fuel Filter Type: Recommended Fuel: Fuel Consumption: l/hr (US gal/hr) Naturally Aspirated Replaceable Element Standby Load (Based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Replaceable Element Cooling System Cooling System Capacity: I (US gal) Water Pump Type: Heat Rejected to Water & Lube Oil: Heat Radiation to Room: Heat radiated from engine and alternator Radiator Cooling...

 Open the catalog to page 2
10 - 13 kVA Single Phase diesel power generator set-3

Alternator Physical Data Alternator Operating Data Insulation Class: Winding Pitch Code: Ingress Protection Rating: Excitation System: Leroy Somer Voltage Reguation: (Steady state) Wave Form NEMA = TIF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: kW(Btu/min) Suppression is in line with European Performance Data: Data Item Motor Starting Short Circuit Reactances shown are applicable to prime ratings. *Based on 30% voltage dip at 0.9 power factor.

 Open the catalog to page 3
10 - 13 kVA Single Phase diesel power generator set-4

General Information A full set of operation and maintenance manuals and circuit wiring diagrams. The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22. FG Wilson is a fully accredited ISO 9001 company. EU Stage IMA Emissions Compliant. All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two year manufacturer's warranty. For details on warranty cover please contact your local Dealer, or visit our website: FGWilson.com. Dealer contact details: FG Wilson manufactures product in...

 Open the catalog to page 4

All FG WILSON catalogs and technical brochures

  1. P7.5-4S

    4  Pages

  2. PG525B1

    4  Pages

  3. PG450B1

    4  Pages

  4. PG1250B2

    4  Pages

  5. PG375B3

    4  Pages

  6. PG345B3

    4  Pages

  7. Rental Range

    7  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.