video corpo cad

Valve terminals type 32 MPA
82Pages

{{requestButtons}}

Catalog excerpts

Valve terminals type 32 MPA - 1

Valve terminais type 32 MPA

Open the catalog to page 1
Valve terminals type 32 MPA - 2

Valve terminais type 32 MPA Key features Innovative Versatile Reliable Easy to mount Slim high-performance valves in Modular system offering a range of Օ Sturdy and durable metal Ready-to-install unit, already sturdy metal housing configuration options components assembled and tested MPA1 flow rates up to 360 l/min Օ Expandable up to 128 solenoid -Valves Lower selection, ordering, installa- MPA2 flow rates up to 700 l/min coils -Manifoldblocks tion and commissioningcosts From the individual valve to the Օ Conversion and expansion possible -Seals Secure mountingon wall or H-rail valve...

Open the catalog to page 2
Valve terminals type 32 MPA - 3

Valve terminais type 32 MPA Key features Reduced downtimes: - Two-colour LED diagnostics on site Width 10 mm and 20 mm - Reliable operation: Manual override non-detenting/detentingorwith cover Compact: Slim valves and flat plate silencers Flexible: 64 valve positions/128 solenoid coils (FB) 24 valve positions/24 solenoid coils (MP) Functional: Sturdy metal thread or pre-assembled QS fittings Modular: Supply plates facilitate the creation of multiple pressure zonesaswell asnumer-ous additional exhaust and supply ports Wide range of valve functions Practical: Large inscription labels...

Open the catalog to page 3
Valve terminals type 32 MPA - 4

Valve terminais type 32 MPA Key features Valve terminal configurator Online via: www.festo.com Selectingan MPA valve terminal using The valve terminals are fully the online catalogue is quickand easy assembled accordingtoyour order The valve terminal type 32 is ordered usingthe order code. thanks to the convenient valve specifications and are individually terminal configurator provided. This tested. This reduces the assembly and Orderingsystem for type 32 makes it much easier to find the right installation time to a minimum. Internet: mpa product. Orderingsystem for CPX Internet: cpx 2D/3D...

Open the catalog to page 4
Valve terminals type 32 MPA - 5

Valve terminais type 32 MPA Key features Individual connection Valves can also be used on individual The electrical connection is estab-sub-bases for actuators further away lished usinga standard 4-pin M8 plug from the valve terminal. (EN 60947-5-2). Multi-pin plug connection The signal flow from the controller to the valve terminal takes place via a pre-assembled or self-assembled multi-wire cable to the multi-pin plug connection, which substantially reduces installation time. The valve terminal can be equipped with max. 24 solenoid coils. This corresponds to 4to 24MPA1or2to 24 MPA2...

Open the catalog to page 5
Valve terminals type 32 MPA - 6

Valve terminais type 32 MPA Fieldbus connection via the cpx System ftn intepated fietdbus node mandes communication with a hr^er order PIC* Thlsenables a space-saving pncunatk and efctirork solution. Varve terminais with fieldbus inter- Versions tacescan be nflgured with up to ܕ Piofibus Vf 16 manifold blocks, tn njunctkrt ܕ PiofiMet withMMl and&solenoldcoilsper In ter bus manifold bk>ck* up to 123 sctooid Օ DeviceNet connection coils can thus be actuateri *n HP« CAhbpen with 4 sotenoid coilsper manifold Օ CC-tink block tan actuate 64 soJencM toik Elhemet/IP * Front End Controller Hemc*e Օ...

Open the catalog to page 6
Valve terminals type 32 MPA - 7

Valve terminais type 32 MPA Peripherals overview Modular pneumatic components The modular design of the MPA facilittes maximum flexibility right from the planning stage and offers maximum ease of service in operation. The system consists of manifold blocks and valves. The manifold blocks are screwed together and thus form the support system for the valves. They contain the connection ducts for supplying compressed air to and vent-ingfrom the valve terminal as well as the working lines for the pneumatic drives for each valve. Each manifold block is connected to the next usingthree screws....

Open the catalog to page 7
Valve terminals type 32 MPA - 8

Valve terminais type 32 MPA Peripherals overview Individual sub-base size 1 Ordering: Individual sub-bases can be equipped The electrical connection is estab- Using individual part numbers with any valve. lished usinga standard 4-pin M8 plug (EN 60947-5-2). Designation Brief description Page/Internet 111 Solenoid valve MPA1 72 |2| Manual override Non-detenting/turningwith detent, per solenoid coil - 131 Covercap formanualoverride Conversion from detenting/non-detentingto non-detentingor covered 77 4 Sub-base For individual valve MPA1 74 |s| Fittings and/or silencers M7 for working lines (2,...

Open the catalog to page 8
Valve terminals type 32 MPA - 9

Valve terminais type 32 MPA Peripherals overview Individual sub-base size 2 Ordering: Individual sub-bases can be equipped Using individual part numbers with any valve. The electrical connection is estab- An adjustable pressure regulator can lished using a standard 4-pin M8 plug be installed between the manifold (EN 60947-5-2). block and the valve in order to control the force of the triggered actuator. 4 Designation Brief description Page/Internet 111 Solenoid valve MPA2 72 |2| Manual override Non-detenting/turningwith detent, per solenoid coil - 131 Cover cap for manual override...

Open the catalog to page 9
Valve terminals type 32 MPA - 10

Valve terminais type 32 MPA Peripherals overview Pneumatic components of the valve terminal - Multi-pin plug, AS-interface The manifold blocks are either Double solenoid valve positions Օ Single solenoid valve positions can prepared for: can be equipped with any valve or a only be equippedwithsingle 2 or 4 single solenoid valves blanking plate. solenoid valves. Օ 2 or 4 double solenoid valves dependingon the size. 9 ET LE 10 internet: www.festo.com/catalog/... Subject to change-2011/06

Open the catalog to page 10
Valve terminals type 32 MPA - 11

Valve terminais type 32 MPA Peripherals overview Dsignation Brief description Page/Internet |l| Electronics module - 76 121 Solenoid valve Size 1 72 |3| Cover cap for manualoverride Conversion from detenting/non-detentingto non-detentingor covered - 141 Blanking plate For unused valve position (vacant position), size 1 77 5 Mounting Optional for valve terminal mounting (on supply plate) 74 |6| Flat plate silencer - - |7| Exhaust plate Forducted exhaust air 77 181 Regulator plate Size 2 73 191 Solenoid valve Size 2 72 aj Blanking plate For unused valve position (vacant position), size 2 77...

Open the catalog to page 11
Valve terminals type 32 MPA - 12

Valve terminais type 32 MPA Peripherals overview Pneumatic components of the valve terminal - CPI connection, fieldbus The manifold blocks are either Double solenoid valve positions prepared for: can be equipped with any valve or a Օ 2 or 4 single solenoid valves blanking plate. 2 or 4 double solenoid valves dependingon the size. Օ Single solenoid valve positions can only be equippedwithsingle solenoid valves. 4 3 2 1 12 Internet: www.festo.com/catalog/... Subject to change-2011/06

Open the catalog to page 12

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs