video corpo cad

Valve terminal type 12 CPA
33Pages

{{requestButtons}}

Catalog excerpts

Valve terminal type 12 CPA - 2

Valveterminaltype12CPA, Compact Performance Key features Innovative Compact valves in sturdy metal housing Օ Patented electrical linkingsystem for flexible expansion options Standardised system of electrical connection options: - Individual connection - Multi-pin connection -Festo CP bus - All common fieldbuses Օ Suitable for electrical peripherals CPX. This means: - Diagnosis down to the individual valve - Parameterisable error characteristics - Separate load voltage supply for valves - On the spot diagnosis using LEDs or CPXhandheld device (MMI) Flexible Modular system offering a range...

Open the catalog to page 2
Valve terminal type 12 CPA - 3

Valveterminal type12CPA, Compact Performance Key features Equipment options TheCPAvalveterminal isavailable with the followingvalve functions: 2x 3/2-way, single solenoid, normallyopen Օ 2x 3/2-way, single solenoid, normallyclosed 2x3/2-way, single solenoid, 1x normally open, 1x normally closed Օ 5/2-way, single solenoid 5/2-way, double solenoid Օ 5/3-way, mid-position pressurised 5/3-way, mid-position exhausted Օ 5/3-way, mid-position closed Different pressure zones can be created by using valve bases with pressure-zone separation.Space for future expansion can be reserved via a...

Open the catalog to page 3
Valve terminal type 12 CPA - 4

Valveterminal type12CPA, Compact Performance Peripherals overview Electrical components The valve terminais are available with The electrical connector modules are The electrical bridge incorporates: five different electrical connection attached to the left-hand side. LED for switching status display types: Connections are established between Օ Manual override Individual connection the electrical connector modules and Օ Coil managementwith current Multi-pin connection the valves by means of horizontal reduction Օ Fieldbus connection linkage and bridges. Label holder for inscription labels Օ...

Open the catalog to page 4
Valve terminal type 12 CPA - 5

Valveterminal type12CPA, Compact Performance Peripherals overview Overview - CPA type 12 Pneumatic components Modular design consistingof individual sub-bases and valves Pneumatic supply ports in the left-hand and right-hand end plate Օ Pneumatic workinglines in the sub-base CPAvalves are mounted on sub-bases. Sub-bases supplythe valves with The valves are supplied and exhausted pneumaticallyvia the sub-base. Size 10 mm and 14 mm Օ Valves pneumaticallypiloted Piston spool with patented sealing principle compressed air and auxiliarypilotair and facilitate exhausting. Typesofsub-base:...

Open the catalog to page 5
Valve terminal type 12 CPA - 6

Valveterminal type12CPA, Compact Performance Peripherals overview Individual connection with plug sockets Valve terminal with individual 2 to 44 solenoid coils can be selected connection: with individual connection. Connection is independentofthe control technology used. This ensures correct polarity during installation. The connector plug is equipped with an LED which indicates switching status, and an overvoltage protective circuit. Multi-pin connection Valve terminal with multi-pin connection: Control signals from the controller to the valve terminal are transmitted via a pre-assembled...

Open the catalog to page 6
Valve terminal type 12 CPA - 7

Valveterminal type12CPA, Compact Performance Peripherals overview CPV Direct CPV Direct is a system for the compact connection ofa CPV valve terminal on the basis of nine different fieldbus standards. The most important fieldbus types including Profibus, Interbus, DeviceNetand CANopen are supported. Thefieldbusnodeisintegrated directly in the electrical interface of the CPV valve terminal and therefore takes up only a minimal amount of space. The CP string extension option allows the functions and components of the CP installation system to be used. Instead of an output module with with a...

Open the catalog to page 7
Valve terminal type 12 CPA - 8

Valveterminal type12CPA, Compact Performance Key features - Pneumatic components Valve function Code Circuit symbol Size Description 10 14 Single solenoid valve, 5/2-way 82/84a Valve slice Y is a single solenoid valve on a double solenoid sub-base. Pneumatic springreturn 12/140 3/5* Double solenoid valve, 5/2-way 82/84 a ■ ■ 1± 12/146 3/5* B 5/3-way, mid-position pressurised 82/84 The piston rod ofa connected cylinderadvanceswhen the valve is in the normal position due to the differential piston areas. Օ Mechanical springreturn ■ ■ 12/14 6 3/E 1 G 5/3-way, mid-position closed The piston rod...

Open the catalog to page 8
Valve terminal type 12 CPA - 9

Valveterminal type12CPA, Compact Performance Key features - Pneumatic components Code Circuit symbol Size Description 10 14 K 2x 3/2-way, normally closed 82/84» i 2 12/14 o 3/si il" ■ Pneumatic springreturn H 2x 3/2-way, 1x normally open (piloting 12), 1x normally closed (piloting 14) 82/84 A il 2 ' - - ! - 12/-KO 3/5? 1 i ■ For optimised cylinder movement. Corresponds to valve func-tion M with simultaneous actuation of both solenoid coils (5/2-way, single solenoid). Since the piston area on each side can be pressurised or exhausted separately, the cylinder can move faster. Օ Pneumatic...

Open the catalog to page 9
Valve terminal type 12 CPA - 10

Valveterminal type12CPA, Compact Performance Key features - Pneumatic components Compressed air supply and venting The valve terminais are supplied with air via the left-hand and right-hand end plate. CPA valves used are pneu-matically piloted and the pilot air supply is branched from the main supply (internal) or fed via a separate connecͭtion (i.e. external). Internai pilot air supply This can be selected when the supply pressure of the main supply (at port 1) is 3 ... 8 bar. With internal pilot air supply, thebranch lineislocated in the right-hand end plate. There is no port 12/14....

Open the catalog to page 10
Valve terminal type 12 CPA - 11

Valveterminal type12CPA, Compact Performance Key features - Pneumatic components Creating pressure zones CPA valve terminal with two pressure zones These CPA valve terminals have a sub-base with pressure zone separation. The left pressure zone is supplied with compressed air via port 1 on the left-hand end plate, while the right pressure zone is supplied with compressed air via port 1 on the right-hand end plate. CPA valve terminal with more than two pressure zones Asub-base withpressure zone the other pressure zones are supplied haust air, a silencer can be installed separation is required...

Open the catalog to page 11
Valve terminal type 12 CPA - 12

Valveterminal type12CPA, Compact Performance Key features - Pneumatic components Pneumatic connection The connection technology of the CPA The following connections for the correspondingconnectors. If "QS valve terminal is flexible and offers a sub-bases can be selected by means push-in connectors" are selected for wide range of connection options. of code letters. The selected code letter the workinglines, the end plates are Screw inserts (clip-type fittings) allow is valid for the entire valve terminal. also fitted with QS push-in connectors. integrated push-in fittings for different The...

Open the catalog to page 12

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs